How did Iommi get his tone?

Andrew Lamprecht

Andrew Lamprecht

Minion of One
I know he used a Treble Booster and an SG with P90s and a Laney.

Is this just the neck pickup with the tb in front of the laney. Or something else? It's definitely wooly like a neck pup but maybe there is something else going on... I don't know... either way....Kick ass tones!





 
Last edited:
Re: How did Iommi get his tone?

I am pretty sure that by VOL 4, Iommi was using John Birch guitars, which have high output pickups. Room and mic placement also have a lot to do with it ...
 
Re: How did Iommi get his tone?

TwilightOdyssey said:
I am pretty sure that by VOL 4, Iommi was using John Birch guitars, which have high output pickups. Room and mic placement also have a lot to do with it ...
Click to expand...

Tony didn't start using John Birch guitars until the 7th album I believe. He was still using his monkey SG.

It just sounds really wooly to me like a neck pup with some ferocity like a bridge pup... I'm thinking its just the treble booster kicking the neck pups ass.... I'm just not sure...



l-3.jpg
 
Last edited:
Re: How did Iommi get his tone?

Wow, check this out... from Gibson.com. Aha... that's where he was getting the woody yet heavy rhythm sound. :headbang:

Were they any specific settings you used?

Basically, I set the presence, middle and treble on 10 with no bass whatsoever. The guitar volume was usually set on full and the three-way toggle switch was set on the up position for chording and in the treble spot for soloing.
Click to expand...
 
Re: How did Iommi get his tone?

blueman335 said:
That's what I'm thinking.
Click to expand...

The thing I will add is that a tone like Tony's old tone, Cream era Clapton. Peter Green, some old Billy Gibbons, Jeff Beck...pretty much the majority of old rock tones...they used BIG amps AND cranked them...a lot of the tone you hear on an old Sabbath album is a byproduct of volume and lots of it...

The woolly you hear is quite simply a Laney amp kicking the asses of 2 4x12 cabs that honestly can barely take it...the amp working way past over time and getting pummeled by a Rangemaster.

You CAN NOT reproduce that sound w/o the volume either...trust me, thousands of men have spend decades and hundreds of thousands of dollars trying and all have failed
 
Re: How did Iommi get his tone?

I wonder what the mods to his rangemaster were? I know he uses a beano boost now but he said he doesn't know what was done to that original pedal.... :dunno:
 
Re: How did Iommi get his tone?

Andrew Lamprecht said:
Wow, check this out... from Gibson.com
Click to expand...

If you play through vintage non master volume amps you find out something VERY quickly...the louder you crank them the bigger and fatter the low end gets...a Laney at the volume levels Tony ran them there was plenty of low end already.

People get hung uip on gear for a specific player and try to cop that sound so for example they get a vintage Laney, SG with P-90's, Rangemaster, etc then claim that there HAS to be something else because they can't get that tone...then half a million fools on a forum tell them it's because they don't have Tony's hands which is just stupid...

The truth is they've modded the amp for a master volume or used an attenuator or even worse put a pedal in front of it and are running the amp on 2...to make matters worse they are using 2 high watt (and also high efficiency) speakers in a small cab to "keep the volume down"....

If they'd get a 4x12 or 2 with the right speakers and turn the amp up...way up so it's really working and really kicking the speakers right in the teeth they'd find they tone but they'd also find the cops on the front steps when they finished however it wouldn't matter because they wouldn't be able to hear what they were saying anyway...

If you really want to nail that sound forget the sound for now...work your ass off, get into a band...play hard, get a record deal, make a lot of money, buy the gear then play arenas...that's really the only way unless you can live alone on an island...with power.


.
 
Re: How did Iommi get his tone?

Andrew Lamprecht said:
I wonder what the mods to his rangemaster were? I know he uses a beano boost now but he said he doesn't know what was done to that original pedal.... :dunno:
Click to expand...

There's only 8 parts in a Rangemaster to start with...most of them make little to no difference aside from the input cap...the input cap sort of decides everything. Tony's more than likely has a bigger input cap in place to let more of the guitars sound come through...
 
Re: How did Iommi get his tone?

the guy who invented fire said:
There's only 8 parts in a Rangemaster to start with...most of them make little to no difference aside from the input cap...the input cap sort of decides everything. Tony's more than likely has a bigger input cap in place to let more of the guitars sound come through...
Click to expand...

Then why has no one been able to do that for him? He said none compare to that first pedal....
 
Re: How did Iommi get his tone?

Andrew Lamprecht said:
Then why has no one been able to do that for him? He said none compare to that first pedal....
Click to expand...

Mojo, vibe listening 25+ years later...

On top of that Tony uses VERY different amps these days

The fact that he uses a Beano is a big statement to me...

FWIW, with my Beano, Sound City and Fane 4x12 I could get VERY close to the old Iommi tone...very close but it was stupid loud!
 
Re: How did Iommi get his tone?

A friend of mine NAILED the early Iommi tone with a Greco SG with T-Tops, into a cranked JTM45 2x12 combo. Everything on 10.
He used the bridge pickup with the tone rolled to zero.
Sounds horrible on paper, but it sounded 95% like those old Sabbath records.
He did have the speakers from an old Twin Reverb combo into that JTM, too.
Can't remember what they were precisely but goddamn did it nail the Sabbath tone.

I'll see if I can ask him.
 
Last edited:
Re: How did Iommi get his tone?

PinkUnicornHorsey used a Rangemaster Clone into a Vox30, (hotplated down for our neighborhood) and launched into "Behind aWall of Sleep";made me a total believer.

I got his Iommi (gib) pkup cuz i wanted ANY part of his Heaven & Hell tone- NO DICE! and u can see he uses it in two songs...
Between his banjo strings, his volume (119 dbs), personalized Laneys and thimblez- i gave up at the edge of the abyss between us & switched to Dmarz SuprD.

But the sign. pkup was good for his 97 tone.

Some fuzz box demos on youtube are pretty convincing "iommi in a box" ads. ask fuzz box expert.
 
Last edited:
Re: How did Iommi get his tone?

the guy who invented fire said:
If they'd get a 4x12 or 2 with the right speakers and turn the amp up...way up so it's really working and really kicking the speakers right in the teeth they'd find they tone but they'd also find the cops on the front steps when they finished however it wouldn't matter because they wouldn't be able to hear what they were saying anyway...
Click to expand...

What I'm getting from all this is that cops love heavy metal.
 
Re: How did Iommi get his tone?

lol ya a cranked 100 watter and an expert producer would be a very nice start... now I will go back to my regularly scheduled sabbath worship :)
 
You must log in or register to reply here.

Similar threads

D
Matching a neck humbucker for the Tone Zone
Replies
13
Views
642
nienturi
nienturi
Masta' C
For the "JB" Nerds... (Inductance and DC Resistance values for older JB models)
Replies
11
Views
496
Rex_Rocker
Rex_Rocker
Chris EmCee
59/Custom Hybrid and Custom Custom in the Battle of '78
2
Replies
35
Views
2K
Ascension
Ascension
DankStar
They’ve forced my hand (direct to PA)
2
Replies
29
Views
1K
Mincer
Mincer
T
Wiring/sound issue after installing Red Devil between single coils on my Strat
Replies
6
Views
622
Teleplayer
T
Back
Top