how will be sound this pickup ?

[maestroberetta]

hello guys i need help for know how the specs will work in terms of tone this pickups have the follow specs
alnico 2 rough cast magnets , 44awg wire gauge , poly wire insulation , 16.3 k
slug bobbin 8.5
screw bobbins 7.8.
how this will sound someone have any ideia ?
thanks a lot

 

[hamerfan]

https://customshop.seymourduncan.com/concept-set/

 

[devastone]

The JB is 43AWG, right? If so, I would guess the OP's pickup would be more midrangey, but I'm not an expert at pickup winding.

 

[Rex_Rocker]

No, the JB is 44.

 

[uOpt]

Should/could be similar to a JB/A2.

 

[eclecticsynergy]

▲ ▲ ▲ This.
10% coil offset could make it slightly brighter and a little more open than the JB's symmetrical coils.
But it ought to be in the same ballpark.

 

[maestroberetta]

hello guys how i mensure the inductance , and resonant peak of this pickup ? thanks a lot again

 

[devastone]

No, the JB is 44.

Thanks, I stand corrected.

 

[hamerfan]

Thanks, I stand corrected.

You're welcome!

 

[hamerfan]

Should/could be similar to a JB/A2.

Yep, Concept Set.

 

[GuitarDoc]

At 16.3k, A2 mag, asymmetric coils you think it's going to sound like a JB?

If (IF) that's true...well, that's too bad.

 

[hamerfan]

At 16.3k, A2 mag, asymmetric coils you think it's going to sound like a JB?

If (IF) that's true...well, that's too bad.

Maybe we're lucky and it does not: It depends on the winding.

 

[devastone]

A2 mag, probably more like an RTM, or the Concept set. I had an A2 in a hot would JB once, it was great in a strat with a floyd.

 

[maestroberetta]

At 16.3k, A2 mag, asymmetric coils you think it's going to sound like a JB?

If (IF) that's true...well, that's too bad.

why ???? is so bad

 

[jeremy]

i have a jb in the bridge of a tele and it sounds great