How would this sound??
- Thread starter gianniboy
- Start date
cvansickle
New member
Re: How would this sound??
Like an underwound Brobucker maybe?
You haven't put it into a guitar yet, so it doesn't sound like anything so far.
Like an underwound Brobucker maybe?
You haven't put it into a guitar yet, so it doesn't sound like anything so far.
Mark Cearlock
New member
Last edited:
super rad stuff
Skaforlifeologist
Re: How would this sound??
how would it be wound? there's scatterwinding, unevenly wound coils, wind tightness, all that sort of stuff to consider.
how would it be wound? there's scatterwinding, unevenly wound coils, wind tightness, all that sort of stuff to consider.
Mark Cearlock
New member
blueman335
Mojo's Minions
Benjy_26
25's Nemesis
Re: How would this sound??
Same wind as a JB? I'm going to assume same materials as well.
For one, it'll make a terriffic neck pickup, as the low end should be nice and tight and the pickup should have a pronounced upper midrange and treble response. Credit the alnico 5, 43AWG wire,
Same wind as a JB? I'm going to assume same materials as well.
For one, it'll make a terriffic neck pickup, as the low end should be nice and tight and the pickup should have a pronounced upper midrange and treble response. Credit the alnico 5, 43AWG wire,
bryan the rocker
New member
Re: How would this sound??
maybe a 59b pickup,
maybe a 59b pickup,
Re: How would this sound??
you can actually fit a little more than 5k worth of #42 wire on a bobbin but you are very limited to what pattern you use. the jb uses thinner wire so getting 4.75k on a bobbin would leave plenty of room. it would not sound much like a 59b or anything else that i can think of.
it could be a nice hot neck pup
you can actually fit a little more than 5k worth of #42 wire on a bobbin but you are very limited to what pattern you use. the jb uses thinner wire so getting 4.75k on a bobbin would leave plenty of room. it would not sound much like a 59b or anything else that i can think of.
it could be a nice hot neck pup
LtKojak
New member
Re: How would this sound??
I don't think it would be a good match with a JB wind. Much too bright!
An A8 magnet would compensate, but I'm not sure of the outcome...
I think you want an overwound Jazz with an A8 magnet. That would fit the bill.
HTH,
I don't think it would be a good match with a JB wind. Much too bright!
An A8 magnet would compensate, but I'm not sure of the outcome...
I think you want an overwound Jazz with an A8 magnet. That would fit the bill.
HTH,
