HSH superswitch wiring questions...

JPH118

JPH118

New member
Found this wiring diagram that I like for my current superstrat build, but two things...

1. how would i go about selecting which coil to tap? I'd like to specify Neck outer & bridge inner for all tapped options, but i'm not sure how to.

2. how easily could I add a bridge + neck full option?

Thanks!
 
Re: HSH superswitch wiring questions...

I did that with three position mini switches

an on-off-on mini switch will let you

split to slug coil
series humbucker
split to screw coil

an on-on-on switch will let you

split to a coil ( whichever one you predetermine)
parallel humbucker
series humbucker

of course you would need one for each pickup and would involve
drilling holes in either the face of your guitar or pickguard
 
Re: HSH superswitch wiring questions...

I'm trying to avoid adding a ton of switches... maybe just a push-pull pot to add full neck to full bridge in addition to the 5-way superswitch.

Based on my very limited knowledge, i'm assuming that this diagram will give me both HBs tapped from screw coil... so the easiest question is, how would i rewire them to be slug coil?
 
Re: HSH superswitch wiring questions...

I see how that affects hum canceling, but is it actually tapping a different coil with just that one slight change?
 
You must log in or register to reply here.
Back
Top