HSH with push pull to chose middle PU or N/B humbuckers

[Dagon1]

Hi Folks,
Please advise wiring for my Godin Freeway HSH with SD pickups. (AlnicoPro II neck, Hot rails middle and JB bridge)
My plan is:
In middle position of the 5 way selector - the push pull 250k tone control - pulled position will engage both N + B (like the Les Paul) and back to MIDDLE only when pushed down.

Many Thanks!

 

[vanlandau]

Re: HSH with push pull to chose middle PU or N/B humbuckers

Not sure if that is possible but schaller make a 5 way which can do B-N in position 3 and possibly custom do one that does all 3 in position 3. IF the latter is the case you MIGHT be able to run a dpdt muting the B-N in the up toggle and muting the middle in the down toggle, but coil splitting will make that more difficult. There is also the 4dpt S1 switch but i probably wouldn't go there...

Aside from the traditional 7 way wiring that everybody will probably reccomend you do (including me) you could try the 6 way blade switch freeway does and do:
B
BN
N
bm
m
mn
It's a 3+3 rather than a six in line

HTH