HSS Strat parallel/series HB via 2 way switch, plies 7 way auto split

[JavSanz]

Does anyone have a strat HSS diagram with HB parallel/series selection via 2 way switch, and auto split in position 2 of the blade? Also with either 50s wiring or treble bleed on top. And 1 tone pot for single coils and the other for the bridge

Thanks!


Sent from my iPhone using Tapatalk

 

[GuitarDoc]

Re: HSS Strat parallel/series HB via 2 way switch, plies 7 way auto split

Not sure what you're saying with..."7 way split coil wiring for the 5 way".

 

[JavSanz]

Re: HSS Strat parallel/series HB via 2 way switch, plies 7 way auto split

Not sure what you're saying with..."7 way split coil wiring for the 5 way".

I meant auto split in position 2 of the blade. I’ve edited the question. Thanks


Sent from my iPhone using Tapatalk

 

[GuitarDoc]

Re: HSS Strat parallel/series HB via 2 way switch, plies 7 way auto split

Here's the basic wiring diagram for auto split.

https://docs.google.com/gview?embed...content/uploads/2016/05/2S_1H_5W_1V_2T_AS.pdf

For tone pot on bridge...disconnect the tone pot wire from the 5 way from either neck or middle position lug and connect it to the bridge position lug. You will have the other tone pot for either the neck or middle. To have it on both neck and middle you'd need a super switch.

Here's the diagram for series/parallel.

https://docs.google.com/gview?embed.../uploads/2016/05/WD_Pushpull_minitoggle_3.pdf

But, to get series/parallel AND auto split, you will need the super switch.