hum + hum + 1 volume and coil split switch - bridge too bright

[mike-o]

So that's the setup on my superstrat. The bridge humbucker (Custom Custom)is waaay too bright / sharp / twangy. Had a JB in there and it was even worse. Any volume pot recommendations?

 

[jeremy]

Re: hum + hum + 1 volume and coil split switch - bridge too bright

what value do you have in there now?

if you have a 500k i would go down to 300k or 250k. if you have a 1M then id go down to 500k. if already have a 250k then id wire up a tone control and leave it inside the cavity

 

[TeleLubber]

Re: hum + hum + 1 volume and coil split switch - bridge too bright

what value do you have in there now?

If you have a 500k i would go down to 300k or 250k. If you have a 1m then id go down to 500k. If already have a 250k then id wire up a tone control and leave it inside the cavity

+1