I need a jaguar pickgaurd

[RushOfBlood]

Here's the catch - routed for p-90s.

I also think $100 for a pickguard is ridiculous, i'd rather go without.

Who'll make one under say, 50?
warmoth won't, wd won't. eh?

 

[Lewguitar]

Re: I need a jaguar pickgaurd

WD won't? You sure about that? Lew

 

[Rich_T]

Re: I need a jaguar pickgaurd

you could probably do it yourself with a jig saw and a file. just mark our the dimensions on a pickguard blank, rough it out witha jig saw and file down, then get some medium guage sandpaper to it, and finish off with wet and dry paper.

 

[RushOfBlood]

Re: I need a jaguar pickgaurd

WD won't? You sure about that? Lew

not reasonabley priced, i'm sure.
I think they want more than that for their basic one.
:-\

i would do it myself if it wasn't already routed for humbuckers. maybe i'll just buy one with standard routes and then do that myself. that would be a waste though.

 

[the guy who invented fire]

Re: I need a jaguar pickgaurd

Here's the catch - routed for p-90s.

I also think $100 for a pickguard is ridiculous, i'd rather go without.

Who'll make one under say, 50?
warmoth won't, wd won't. eh?

This does not sound right to me either...

I called WD...they ballparked me a price between $30.00 and $60.00, for a Jag guardplate WITH P-90 holes...

I called Warmoth too...they told me that they CAN NOT DO THAT AT ALL...so you were right about that.

WD said you might have to send in a tracing of the pickguard, but they could AND would do it!

 

[RushOfBlood]

Re: I need a jaguar pickgaurd

well they say they'll do anything with a tracing, so it's not that they WON'T do it, i just don't want to spend so much on it if i don't have to.

i've only ordered from them once before because their prices make me gag. :-\
i need a job so i don't have to be such a tight@$$.

 

[Stratcat]

Re: I need a jaguar pickgaurd

Here's the catch - routed for p-90s.

I also think $100 for a pickguard is ridiculous, i'd rather go without.

Who'll make one under say, 50?
warmoth won't, wd won't. eh?

Try this place
http://www.pickguards.com/FenderMisc.htm
They will custom cut the pickguard for you,
at a good price.

 

[RushOfBlood]

Re: I need a jaguar pickgaurd

i'm pretty sure that's wdmusic's pickguard site