I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

[SHREDDEDSINEW]

Hi guys, my first post!

I'm having a custom body built with 1 hum at the bridge, 1 stacked single at the neck, 1 volume pot, and 1 two-way (on/on) mini toggle. I want the mini-toggle to act as a pickup selecter switch (humbucker OR single), pretty simple. Do any of you have this wiring diagram or know how to wire this? thanks!

 

[idsnowdog]

Re: I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

All you need is a on/on three pole switch which you can get from radio shack for $3. You wire each positive to the far poles and the center goes to the volume pot.

 

[SHREDDEDSINEW]

Re: I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

All you need is a on/on three pole switch which you can get from radio shack for $3. You wire each positive to the far poles and the center goes to the volume pot.

Cool. I have one here and it has 6 poles on the back. Does it matter if I solder left or the right side?



LEFT
________
l { { { l
l { { { l TOP
---------
RIGHT

 

[idsnowdog]

Re: I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

Cool. I have one here and it has 6 poles on the back. Does it matter if I solder left or the right side?

If you have a on/on or on/off/on six pole switch you would just jumper the poles straight across and it would do what you want. Except an on/off/on would be dead in the middle. You would want each pickup to have a side.



LEFT
________
l { { { l
l { { { l TOP
---------
RIGHT[/quote]

 

[SHREDDEDSINEW]

Re: I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

THANKS BRO, i think i got it!

 

[idsnowdog]

Re: I need of a wierd wiring diagram: 2 hum,1vol,1 on/on minitoggle.

THANKS BRO, i think i got it!

**Clarification** You would want the hots to go to the left and right top/bottom corners with the middle as the common. It depends on switch orientation.