Falloffthebonetone
New member
Re: JB in an Alder body, with Maple Neck and Ebony Fretboard
THERE'S the Ad Hominem. My work here is done.
THERE'S the Ad Hominem. My work here is done.
Seriously though, I come back and all I'm getting is 2 more pages about what Warren DiMartini uses/used. WTF?
Also I wouldn't say there's no "informative info" what so ever?
From this thread, a newbie would have learned:
1. Common complaints about the JB include a looser low end and bright upper midrange cut.
2. People can tame the brightness by switching to a lower potentiometer value.
3. You can change the way a pickup responds bu changing it's polepieces.
4. Warren Demartini was an avid user of the JB.
5. Seymour Duncan's JB has developed over the years and originally was designed with an Alnico 2 magnet and 250k pots while the more modern application is an Alnico 5 magnet with 500k pots.
6. Pickups respond and sound different when used at bedroom, recording or performance level volume intervals.
7. Tone is subjectively good or bad.
8. The output of the pickup reflects how the pickup cleans up and stays clean sounding.
9. Alder, ebony, and maple are brighter sounding tone woods while basswood is warmer.
10. Pickups respond differently in different woods.
11. Versatility is a desirable trait in guitar pickup.
12. Some pickups are designed to produce a more compressed tone while others are designed to preserved dynamics.
13. Active pickups such as the emg 81 and 85, utilize a battery to retain a clearer and louder signal.
14. Some people prefer warmer bridge pikups and brighter neck pickups for tonal balance.
15. You can experiment by swapping out humbucking pickup magnets for different tonal results.
16. Alnico 2 yields a softer tone and warmer midrange while alnico 5 is more powerful and has more high and low end.
17. The Full Shred is a cleaner and more focused alternative to the JB.
I think that's pretty good![]()
Also I wouldn't say there's no "informative info" what so ever.
From this thread, a newbie would have learned:
1. Common complaints about the JB include a looser low end and bright upper midrange cut.
2. People can tame the brightness by switching to a lower potentiometer value.
3. You can change the way a pickup responds by changing it's polepieces.
4. Warren Demartini was an avid user of the JB.
5. Seymour Duncan's JB has developed over the years and originally was designed with an Alnico 2 magnet and 250k pots while the more modern application is an Alnico 5 magnet with 500k pots.
6. Pickups respond and sound different when used at bedroom, recording or performance level volume intervals.
7. Tone is subjectively good or bad.
8. The output of the pickup reflects how the pickup cleans up and stays clean sounding.
9. Alder, ebony, and maple are brighter sounding tone woods while basswood is warmer.
10. Pickups respond differently in different woods.
11. Versatility is a desirable trait in guitar pickup.
12. Some pickups are designed to produce a more compressed tone while others are designed to preserve dynamics.
13. Active pickups such as the emg 81 and 85, utilize a battery to retain a clearer and louder signal.
14. Some people prefer warmer bridge pickups and brighter neck pickups for tonal balance.
15. You can experiment by swapping out humbucking pickup magnets for different tonal results.
16. Alnico 2 yields a softer tone and warmer midrange while alnico 5 is more powerful and has more high and low end.
17. The Full Shred is a cleaner and more focused alternative to the JB.
I think that's pretty good![]()
It'll become a one trick pony that will do nothing but yell and cuss at you.
What about a Ceramic Magnet with the JB? I have a cermamic mag that I could swap into it.
yeah, you really took the high road on that one, darth.