John, or anyone else, wiring problem with TS9DX, need help

[Xeromus]

I'm fixing a buddy's TS9DX, and there is a yellow wire that obviously came loose. It's marked 11 and yellow on the pcb but I can't find a corresponding point to solder it to on any of the boards. Where in the hell does this wire go? I'll post a picture soon.

 

[STRATDELUXER97]

Re: John, or anyone else, wiring problem with TS9DX, need help

I'm fixing a buddy's TS9DX, and there is a yellow wire that obviously came loose. It's marked 11 and yellow on the pcb but I can't find a corresponding point to solder it to on any of the boards. Where in the hell does this wire go? I'll post a picture soon.

I'm at work currently at my Fire Station and return home tomorrow...Let me look at my board pictures tomorrow and I'll send a message to you...Unless you figure it out on your own?

John

 

[Xeromus]

Re: John, or anyone else, wiring problem with TS9DX, need help

I'm at work currently at my Fire Station and return home tomorrow...Let me look at my board pictures tomorrow and I'll send a message to you...Unless you figure it out on your own?

John

okay great, thanks john, I can't find anywhere that is missing a wire. And all the points are labeled with a corresponding wire, I don't see anywhere that #11 should go.

 

[STRATDELUXER97]

Re: John, or anyone else, wiring problem with TS9DX, need help

okay great, thanks john, I can't find anywhere that is missing a wire. And all the points are labeled with a corresponding wire, I don't see anywhere that #11 should go.

Check your jack connections....Input and output...

 

[Xeromus]

Re: John, or anyone else, wiring problem with TS9DX, need help

still no luck, I must be missing something, either that or it shares a point with another wire.

 

[proxy]

Re: John, or anyone else, wiring problem with TS9DX, need help

Google a schematic.

 

[Xeromus]

Re: John, or anyone else, wiring problem with TS9DX, need help

Google a schematic.

tried that too, no good, not any that addressed that wire. Most only pertained to mods, and the parts that are swapped out for a mod.

 

[Xeromus]

Re: John, or anyone else, wiring problem with TS9DX, need help

got it!!! thanks guys, I figured it out finally.

 

[STRATDELUXER97]

Re: John, or anyone else, wiring problem with TS9DX, need help

got it!!! thanks guys, I figured it out finally.

My pictures showed the yellow wire going from 11 on the board over to the "input jack"...Glad you got it...That's very common for the wires to snap flush at the jack connections... :13:

John