brentrocks
New member
I bought this from the original owner a little while back.
The guitar was built by Paul Wolfson of Wolfson custom guitars in the Phoenix AZ local.
It is a neck thru construction of Black Korina with a heavily flamed and spalted maple top. It has a Pau Ferra fretboard bound in black, as is the rest of the body and pedhead.
I bought the guitar with no electronics. I installed a RS Guitarworks 50s harness and Duncan 59s with A2 mags. During the installation of the harness, I chipped out a small piece of wood by the bridge volume pot. i glued it back in. Its not terribly noticeable...but its there (my own dumb ass fault)
The neck is a comfy medium C. 1 11/16 nut. 1st fret depth is .820. 12th fret depth is .880. The frets show very minor, to no wear.
This guitar is also equipped with a Gotoh roller bridge and tailpiece, locking Grover tuners and Schaller strap lock buttons.
It weighs 9 lbs and comes with a hard shell case.
This guitar produces a warm, rich tone! Not overly bright or dark. It has a great setup with 10-46s...a real joy to play!
$1100 pp/shipped cont USA
Thanks for looking!
IMG_6805 by brent HENDERSON, on Flickr
IMG_6806 by brent HENDERSON, on Flickr
IMG_6808 by brent HENDERSON, on Flickr
IMG_6809 by brent HENDERSON, on Flickr
IMG_6810 by brent HENDERSON, on Flickr
IMG_6811 by brent HENDERSON, on Flickr
IMG_6812 by brent HENDERSON, on Flickr
IMG_6813 by brent HENDERSON, on Flickr
IMG_6814 by brent HENDERSON, on Flickr
IMG_6815 by brent HENDERSON, on Flickr
IMG_6807 by brent HENDERSON, on Flickr
IMG_6795 by brent HENDERSON, on Flickr
IMG_6796 by brent HENDERSON, on Flickr
IMG_6798 by brent HENDERSON, on Flickr
IMG_6799 by brent HENDERSON, on Flickr
IMG_6800 by brent HENDERSON, on Flickr
IMG_6802 by brent HENDERSON, on Flickr
IMG_6803 by brent HENDERSON, on Flickr
IMG_6816 by brent HENDERSON, on Flickr
The guitar was built by Paul Wolfson of Wolfson custom guitars in the Phoenix AZ local.
It is a neck thru construction of Black Korina with a heavily flamed and spalted maple top. It has a Pau Ferra fretboard bound in black, as is the rest of the body and pedhead.
I bought the guitar with no electronics. I installed a RS Guitarworks 50s harness and Duncan 59s with A2 mags. During the installation of the harness, I chipped out a small piece of wood by the bridge volume pot. i glued it back in. Its not terribly noticeable...but its there (my own dumb ass fault)
The neck is a comfy medium C. 1 11/16 nut. 1st fret depth is .820. 12th fret depth is .880. The frets show very minor, to no wear.
This guitar is also equipped with a Gotoh roller bridge and tailpiece, locking Grover tuners and Schaller strap lock buttons.
It weighs 9 lbs and comes with a hard shell case.
This guitar produces a warm, rich tone! Not overly bright or dark. It has a great setup with 10-46s...a real joy to play!
$1100 pp/shipped cont USA
Thanks for looking!
IMG_6805 by brent HENDERSON, on FlickrIMG_6806 by brent HENDERSON, on FlickrIMG_6808 by brent HENDERSON, on FlickrIMG_6809 by brent HENDERSON, on FlickrIMG_6810 by brent HENDERSON, on FlickrIMG_6811 by brent HENDERSON, on FlickrIMG_6812 by brent HENDERSON, on FlickrIMG_6813 by brent HENDERSON, on FlickrIMG_6814 by brent HENDERSON, on FlickrIMG_6815 by brent HENDERSON, on FlickrIMG_6807 by brent HENDERSON, on FlickrIMG_6795 by brent HENDERSON, on FlickrIMG_6796 by brent HENDERSON, on FlickrIMG_6798 by brent HENDERSON, on FlickrIMG_6799 by brent HENDERSON, on FlickrIMG_6800 by brent HENDERSON, on FlickrIMG_6802 by brent HENDERSON, on FlickrIMG_6803 by brent HENDERSON, on FlickrIMG_6816 by brent HENDERSON, on Flickr
