Les Paul Studio -> random wiring question

bloodpuppy11

New member
Hey y'all-

File this one under "Trying to understand things".

So I recently purchased the 1995 Gibson Les Paul Studio pictured below for what we will charitably describe as a "budget" price (it has a less-than-pretty headstock repair). Anyways, I bring it home and open up the back to look at the electronics and see something I have not seen before; apparently the pots are all attached to a metal plate of some sort (pictures below). The output jack is wired to a "tree" in the center of the plate. Oh, and the caps are wired so that they link the volume and tone pots.

Again, this is a different configuration than what I am used to. I should mention that I have worked on other Les Pauls ('89 Standard, '93 Studio, '94 Studio) and I have never seen this.

My question, for those of y'all who know way more about this stuff than me:

-What's with the metal plate? Was this a standard component of Gibson wiring in 1995, or is it possible that this was some sort of aftermarket thing?

As ever, thanks for your help and expertise.

->Patrick
 
Re: Les Paul Studio -> random wiring question

I'm assuming the metal plate is supposed to function like the foil tape in my Flying V: by being attached to it, everything is grounded.

Only you can tell us how effective it is, but it seems like a wonderful concept.

Is there anything explicitly wrong with it?
 
Re: Les Paul Studio -> random wiring question

It is normal. My 2006 Standard P90 limited edition Goldtop has exactly the same electronics in its control cavity.
 
Re: Les Paul Studio -> random wiring question

Wow, that was fast.

@ astro- Nothing wrong with the wiring, and the grounding seems fine. Just trying to learn more about stuff. =)

@ funk- Good to know. Thanks!

->Patrick
 
Re: Les Paul Studio -> random wiring question

My 1986 Les Paul Custom had that plate. It was used for grounding, as well as to pre assemble the pots/wiring harness outside of the guitar before installation.
 
Back
Top