"Mega Strat wiring" by guitartechcraig.com

Re: "Mega Strat wiring" by guitartechcraig.com

Izzythecat said:
If you wire it as shown in the hermetico diagram posted 11/11, the pushpull will operate in reverse of what is expected. Using my terminal mapping method (in the step by step posted above) terminals 1,2,3, and 4 are connected when the pushpull is down; terminals 3,4,5,and 6 are connected when the pushpull is up.

There are also some style differences between my step by step and the aforementioned diagram (tone pot wiring, inversing the pushpull from left to right) but that is a more readable diagram than the original.

The hermetico diagram should still work, but the results will be reversed.

Been there - done that.
Click to expand...
Now, I've got you.
That! diagram was removed. It was definitively wrong!.
What I've posted the 11/12 is the right one.
I fully agree with that.
I am sorry, but I didn't realized that you were discussing about a diagram that wasn't in this thread when you posted this comment!!!.
:scratchch
 
Re: "Mega Strat wiring" by guitartechcraig.com

Version 3 of the "Mega" Strat diagram had a missing connection. Version 4 below is correct and includes updated component drawings to make the diagram easier to read. Thanks for everyone's interest. I'm working on new diagrams all the time for myself, customers, and just to see what I can come up with. Visit my site for updates or my facebook page for details of my projects. For now, all information remains free and public domain.

Guitar Tech Craig

tech01.jpg
 
You must log in or register to reply here.
Back
Top