My bass amp thoughts...?

Hoss

Joyfulnoiseologist
here's what i'm thinking for a new bass rig...of course my budget is limited, so i'm gonna go used on the head at least and the cab if i can find one!?

first off this...i've played it extensively at a local shop...LOVE IT!!!


GBE600_LG.jpg

"The GBE 600 is a powerful amp delivering over 600 watts of huge articulate output and includes profeatures that rival other designs hundreds of dollars more expensive. We included a feature set sought after by many pro players and the "Rock-Solid" design, construction and quality components insure confident performance night-after-night. A unique design appointment of the GBE 600 is the footswitchable capabilities that provide channel selections or signal contours via the sturdy metal foot pedals. This "flexibility at the feet" of the player, catapults the GBE 600 into a class all its own.

Two preamps are on board; one F.E.T. and one 12AX7 Tube which can be switched or mixed together via the 2 button footswitch which comes standard with each unit. Our versatile Signal Shape Circuits are provided to sculpt the tone of the GBE 600 ahead of the 5 band EQ. These circuits along with the Signal Mute are accessible via the optional 4 button footswitch.

The GBE 600 is a high voltage, high current pro audio based power amp design capable of delivering it's conservatively rated power into resistive and reactive "real world" speaker loads. With its internal fan and active "cooling tunnel" under the massive heat-sink, the GBE 600 is capable of driving a 2 ohm load all day!! Our unique thermal circuitry provides advance notification of impending thermal shutdown, in the case of blocked air flow or insufficient fan speed.

This powerful amp is rated at 275 watts @ 8 ohms, 425 watts @ 4 ohms and over 625 watts @ 2 ohms.


FEATURES • Active/Passive Input
• Signal Mute Switch
• Tuner Out
• F.E.T./12AX7 Tube Pre-Amps
• Tube Gain and Volume Controls
• Channel Mix Switch
• Input Status LED’s
• Signal Shape Circuit with L.F. Extend, Mid Scoop, H.F. Attack, all Adjustable (Min.-Max.) and Footswitchable (Optional 4 Button Footswitch Available)
• Active 5 Band Equalization Section with Two Shelving and Three Peaking Networks
• Comprehensive Amplifier Status LED's
• Master Volume Control
• Unique "Soft-Limit" Circuit
• XLR Direct Out with Pre/Post Sw.; Ground-Lift Sw.; Adjustable Level Control
• Effects Loop
• Speakon™ and 1/4" Speaker Outputs (2 each)
• Dual Voltage 115/230V Toroid Transformer
• Switchable High/Low Fan Cooling


GBE 600 Bass Amp comes standard with the 2-button foot-switch.
The 4-button foot-switch is optional.

Power
Output Cabinet
Response Speaker
Configuration Preamp
Type Weight
Lbs. Dimensions
HxWxD
275 W/425 W/625 W
8 ohm/4 ohm/2 ohm N/A N/A FET/TUBE 25 3 1/2" x 19" x 14 1/2"
 
Re: My bass amp thoughts...?

and an Avatar Cab!

b410kappa.jpg

"The new front ported B410 Kappa PRO features four MONSTROUS Eminence Kappa PRO ten inch bass speakers and a Foster High Frequency Horn Tweeter for unbelievable bass response!! The American made Eminence Kappa PRO tens have huge 80 oz. magnets, large 3 inch voice coils, and a lightweight die cast aluminum basket for extra rigidity. These Kappa PRO tens have a lower frequency response than our previous popular B410 delta bass cab. Each Kappa PRO ten inch speaker is rated at 500 watts RMS. The cab is made from superior 3/4 inch voidless Baltic Birch PLYWOOD with rabbet and dado interlocking side joints for extreme strength. The Foster high frequency compression horn tweeter is THE most popular tweeter used by some of the best companies in the business. The tweeter is filtered with a smooth sounding 6dB per octave slope mylar capacitor crossover and has an adjustable tweeter volume control on the back input panel. The tweeter volume control allows you to turn the tweeter up for larger rooms or to turn the tweeter down for smaller rooms. The cabinet is covered in black carpet, has protective corners, large recessed steel bar handles, full face steel diamond pattern expanded metal grill, front slot port, steel input panel with one Speakon connector and dual 1/4 inch in/out jacks. All three jacks on the back panel are wired together in parallel so you can go in or out of any of them for maximum flexibility when connecting this cab to amps or to other speaker cabs. Available in ONE of the following: 4 ohm or 8 ohm This B410 Kappa PRO cab delivers awesome hard hitting punch and low end. Weight 95 lbs, For speaker specs, please see Eminence.com Dimensions 27H x 25W x 16.5D. One year warranty and 14 day return policy."
 
Re: My bass amp thoughts...?

any thoughts...suggestions...experiences...?!?!?!


i'm looking at around $600 bucks used for the GBE 600 and $379 for the B410 Pro

Sooo...basically a grand for both...what do you think...is this the most bang for your buck that you can think of for a bass rig...?!
 
Back
Top