My new pedalboard

[Mikelamury]

Just completed my first real pedalboard! It took me a little while but I feel it came out very good looking. I tried my best to make all the cords look neat I'm not a professional by any means. Signal chain explained below and no those are not my pedal settings haven't got around to setting the pedals yet, still celebrating the pedalboard completion!

From right to left

JHS 3 series fuzz-coppersound pedals strategy v2 preamp/overdrive- JHS 3 series compressor- Mesa Engineering gold mine overdrive (signed by Walter Trout!)- boss tuner- amp
next in line(effects loop)

effects loop send - JHS 3 series chorus- JHS 3 series delay- Boss equalizer- effects loop return

 

[Mikelamury]

Forgot to post pics!

 

[Mikelamury]

Forgot to mention that everything is powered by the MXR iso brick underneath the JHS 3 series fuzz.

 

[NegativeEase]

Hey Mike, if you put some slightly bigger rubber feet on that Nano -you can fit that MXR power supply underneath the board all tucked in and safe.

 

[NegativeEase]

Hey Mike, if you put some slightly bigger rubber feet on that Nano -you can fit that MXR power supply underneath the board all tucked in and safe.

Youll need to measure the clearance you need, but some big no slip feet like this..

https://westcoastpedalboard.com/product/pedalboard-and-case-feet/

or this

https://www.amazon.com/dp/B0B19BMVN...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==


I would avoid super hard rubber version like this because you'll be chasing your board around the stage

https://www.amazon.com/Medium-Extra...t=&hvlocphy=9010767&hvtargid=pla-795629888325