RW James
New member
I had to reconfigure my pedalboard to get the Weeping Demon in there. So I pulled everything out and packed it back in - a little neater and less prone to problems, hopefully.
The board is divided into two sections, (1) before amp and (2) effects loop.
The input is goes through my Switcheroo (from B Bent). I have it setup so I can have two guitars ready to go and switch without unplugging and plugging. I added the little colored tape tabs to match the lights Greg used and to match the color codes on my cables.
From there it goes to the tuner -> Weeping Demon -> Bad Monkey -> Tubulator -> Super Feedbacker -> Heavy Metal, then through the blue cable plug to the amp.
Then from the effects loop into the red cable plug though the Delay -> Small Clone Chorus -> Tremolo.
The power lead plugs with blue tape are for the old style Boss pedals. Their power comes from an old Boss power supply. The other power leads come from a Godlyke power supply.
I have the pedals on the top shelf that I use the least (I rarely play lead) and most used on the bottom shelf.
Comments? Suggestions?
Last edited: