My Pink Tiger - Ultimate 80s Machine

nienturi

Active member
This is my guitars. There are many others like it, but this one is mine. My guitar is my best friend. It is my life :)

Anyway, this is some kindo partcaster super strat thing i've done. It has a Jackson Dinky body made of alder, one piece maple neck with rosewood board and tree of life inlays on, German made floyd rose trem with steel block&stainless steel saddles, Dimarzio PAF Pro and Super Distortion humbuckers, in the middle a jackson single coil (i could swap it because of the narrow route/since i don't use it individually, just let it stay).

Sounds good, plays good and despite all the faults and imperfections with the home applied finish the appearence is good to me :)

IMG_20231017_172749 by Baris Sahin, on Flickr IMG_20231017_172804 by Baris Sahin, on Flickr

IMG_20231017_172955 by Baris Sahin, on Flickr
IMG_20231017_173021 by Baris Sahin, on Flickr
IMG_20231017_173050 by Baris Sahin, on Flickr
IMG_20231017_173121 by Baris Sahin, on Flickr
IMG_20231017_173138 by Baris Sahin, on Flickr

www.tonejourney.com
 
If you didn't tell me it wasn't a factory finish I wouldn't have known. Not a color combo you see every day but it works!
 
Nicely done, I see nothing with that nor the finish. Rock it.

Thanks :)

If you didn't tell me it wasn't a factory finish I wouldn't have known. Not a color combo you see every day but it works!

If you can hold it, you had no suspect with my touch :)

It's a little understated for me. :P

:)

looks like a rock machine! who made the neck for ya?

It is an import neck. But had issues so i had to fix it. Moreover it had fender style headstock so i had to make it circumsized into old Kramer headstock :)
 
AsPQeIP.jpg

.
 
It is an import neck. But had issues so i had to fix it. Moreover it had fender style headstock so i had to make it circumsized into old Kramer headstock :)

I noticed the old Kramer Beak headstock right away. Nice job reworking it to look like that. The whole guitar looks good.
 
Back
Top