My witch hat knobs don't fit. Please help.

Status
Not open for further replies.
blakejcan

blakejcan

Well-known member
I have this new wiring harness that I like quite a bit that has CTS pots:

https://www.amazon.com/gp/product/B01M19ZA1Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I thought I could just push on these witch hat knobs on cause they say they are good for CTS but they were too big. Just flop right off.

https://reverb.com/item/6553526-new...-w-silver-inserts-fits-gibson-cts-split-shaft

I'm guessing the type of CTS pots that come on that harness are a different size than standard but having a tough time figuring out what to do. Is there a different size witch hat? Can I get an adapter bushing or something else to make them stick?

https://www.philadelphialuthiertools.com/misc-hardware/brass-pot-adapter-sleeves-5-pack/

Thanks internet friends!
 
Last edited:
Re: My witch hat knobs don't fit. Please help.

Return the knobs and get traditional set screw witch hats. Then get those Allparts brass split-to-solid adapter sleeves.
 
Re: My witch hat knobs don't fit. Please help.

The problem, as you are aware, is that you bought solid shaft pots and split shaft knobs. Those are incompatible. You can either replace the pots with CTS split shaft pots, or replace the knobs with ones designed for solid shafts (with a set screw). You probably won't need the bushings...those are used for putting solid shaft knobs on split shaft pots.
 
Re: My witch hat knobs don't fit. Please help.

If this is true
One could drill and tap for a small set screw in each knob
 
Re: My witch hat knobs don't fit. Please help.

The photos of the harness show split shaft knobs, but the description states solid shaft knobs.
 
Re: My witch hat knobs don't fit. Please help.

ehdwuld said:
If this is true
One could drill and tap for a small set screw in each knob
Click to expand...

Yes, but...the knobs are plastic and wouldn't hold such a small screw. The threads in the knobs would strip with very small force.
 
Re: My witch hat knobs don't fit. Please help.

GuitarDoc said:
Yes, but...the knobs are plastic and wouldn't hold such a small screw. The threads in the knobs would strip with very small force.
Click to expand...

Very small screw and many are made that way

I have several devices with threaded plastic with set screws

But new knobs would solve the problem for around $5
 
Re: My witch hat knobs don't fit. Please help.

hi gang! They are in fact split shaft knobs and the push on (no screw) witch hats don't fit. I am pretty sure that the issue is that CTS has a few different shaft sizes and these are slightly smaller than normal (just like your dad).

I got the bushings and set screw type now. Should be all good! Thanks for the help.
 
Status
Not open for further replies.

Similar threads

cliffenstein
NGD: 2024 Epiphone IBGC Les Paul Custom ($1299 model)
2
Replies
26
Views
399
cliffenstein
cliffenstein
Back
Top