Neck position question: a single coil and a humbucker at the neck

Gorbyrev

New member
First of all it is time to stop lurking and get my sleeves rolled up! I was just thinking after the Christmas services that I really enjoy my Parker Nitefly. It is currently equipped with an orginal Parallel Axis Trembucker (SH-TB1) which I bought in '89 and has followed me through various guitars. In the middle there is a Parallel Axis stacked single coil (PA-STK1n) which works well. In the neck there is a Maricela Juarez wound neck Parallel Axis Trembucker (PA-TB1n) which I imported from Australia. Here is my dilemma. The tapped sound of the neck Trembucker is brilliant. It is by far the best single coil neck sound I have ever had and is right up there with the Strats I have tried. However the full humbucker sound doesn't quite do it for me. Perhaps the mid-boost the original Trembucker in the bridge has leaves me looking for a bit more midrange push from the neck. So I wondered if the best solution might be to put a true single coil and something like a Lil'59 (or similar) in the neck humbucker route. So here are the questions: is there a problem putting two pickups that close together in terms of the magnetic field and has anyone tried a solution like this successfully? My apologies if this has been addressed before but my searches revealed nothing.
 
Last edited:
Re: Neck position question: a single coil and a humbucker at the neck

I’ve seen that done in the bridge with an HSS (converted to HSSSS), not mine but the guy looked happy and he sounded good. Don’t see why it wouldn’t work in the neck.


Sent from my iPhone using Tapatalk Pro
 
Re: Neck position question: a single coil and a humbucker at the neck

The PATB-2B is a bridge only pickup, there is no neck version. You need a neck pickup like a PATB1-N !
 
Re: Neck position question: a single coil and a humbucker at the neck

I've seen companies make humbucker-sized pickups with 4 rails/ 4 coils, as well as one that's a single-coil pickup and a single-coil-sized rail humbucker side-by-side, so it should work. But those were designed to take one slot, so fitting the two you want together may take some work to the guitar.
 
Back
Top