Need a cocked wah pedal

Re: Need a cocked wah pedal

Push pull pot, 2 caps 1 resistor, $10

I have this in my Tele, and was playing with the idea of housing the same components in a tiny inline housing with a toggle switch so it could be portable from one guitar to another.

Or taking it a step further, in a micro sized pedal with a pot to vary resistance and a ~6 position switch to choose different caps. It's a passive circuit / no DC power required
 
Re: Need a cocked wah pedal

EHX (of course) has a couple of options but a bit overkill if it's one song:
- cock fight
- worm (auto wah in manual mode)


Sent from my iPhone using Tapatalk
 
Re: Need a cocked wah pedal

UMMM

This may have already been stated but,

You could get a wah ,

And COCK it.
 
Re: Need a cocked wah pedal

Push pull pot, 2 caps 1 resistor, $10

I have this in my Tele, and was playing with the idea of housing the same components in a tiny inline housing with a toggle switch so it could be portable from one guitar to another.

Or taking it a step further, in a micro sized pedal with a pot to vary resistance and a ~6 position switch to choose different caps. It's a passive circuit / no DC power required

P-E-D-A-L
 
Re: Need a cocked wah pedal

EHX (of course) has a couple of options but a bit overkill if it's one song:
- cock fight
- worm (auto wah in manual mode)


Sent from my iPhone using Tapatalk

cock fight is the kind of $ we are looking to avoid.
 
Need a cocked wah pedal

Well it is for just one song after all
Can't you restrain your thrashing about for 3 minutes

You can just put this on top of the wah to avoid bumping
c45b8fc418fa40ed088baa9cb0a3ddbb.jpg
 
Re: Need a cocked wah pedal

Take a cheap volume pedal
Remove the ground from the pot
Now its a tone control
Set it where its good
Now remove the rocker mechanism ( the pedal )

Or just get a cheap off brand wah
Set it where you want it and remove the pedal
 
Re: Need a cocked wah pedal

Robin Trower has a pre-cut piece of wood to set his Deja Vibe, you could do similar with a wash, basically put a wedge the right size under the tread plate.


Sent from my iPad using Tapatalk
 
Back
Top