Need advice for my Pickup set (newly bought)

[seymourringo]

Good day

Im here because we're having trouble installing my pickups set on what config we will do

I have a Quarter pound tapped on bridge and Prail on neck

They are both made with coil/tapped series

What potentiometer do I need and capacitor value
Can you send me sample diagram cause I cant find any on diagram section

I have 3way toggle switch also and extra 3 mini toggle switches

They say I can make many pickup configs with proper installation


Thanks!

 

[Clint 55]

Re: Need advice for my Pickup set (newly bought)

500k pots and a 22nf cap will be good.

Here's the diagram to get all combos out of your p rails using 2 on/on mini toggles:

https://forum.seymourduncan.com/attachment.php?attachmentid=60980&d=1423929666

I can't find a good diagram on tapping a single coil. Maybe someone else has one. Also it will help to know how many volume and tones you're using.

 

[seymourringo]

Re: Need advice for my Pickup set (newly bought)

I want the QP to have indepedent sswitch to tap it
I want the prail to have 3 toggle mini switch to choose if only rail/p90 or both open

 

[Mincer]

Re: Need advice for my Pickup set (newly bought)

Do you want a mini switch for the tap, or will a push/pull work? For the P-Rails, will a Triple Shot ring work in your guitar? That is the easiest way to get all combinations of the coils.

 

[seymourringo]

Re: Need advice for my Pickup set (newly bought)

I dont have a triple shot. I just want a 3way mini toggle for rail/series/p90

 

[beaubrummels]

Re: Need advice for my Pickup set (newly bought)

I think you would need an on-off-on 3-way switch and wire red/white to the center lug, hot to one outside lug and ground to the other outside lug.