Need help with blackouts

[Millionthhunter]

Help!!! im using blackouts in my guitar and my dogged knocked over my guitar which hit a cup of water that spilled onto the pickups and when trying to get the out to dry them the connector on the neck pickup broke off. what can i do? solder it back on or something else of am i without a neck pick up now?

 

[Funkfingers]

Re: Need help with blackouts

Welcome to the forum.

You are correct. Snipping off the block connector and soldering to the stumps of the broken contacts is your only practical option. If you are worried about soldering three contacts that are so close together, consider using the two soldering eyelets at the far end of the pickup PCB. (Labelled Hot and Gnd.) The +9v supply goes to broken original pin.