need help!!

[mattk]

I previously posted a thread for a SH-1 59n in my 2001 S470 Ibby. I'm still making a wrong connection. I also added a vintage staggard (mid) and SH-5 (bridge). I had to change all the wiring previously for my old Sey Dun pups. Ibanez wiring didn't match. For some reason my old Sey Dun wiring set-up isn't working. I need help making the right connections for these 3 new pups (SH-1 has only the braided coil, Vin Stag has Bl & Wh cloth wires, and SH-5 (5 way split). If anyone could help color code the new wiring or even better to provide a diagram, I'd really appreciate the time for help.

-Thanks Much

Ibby factory wiring diagram - http://www.ibanez.com/support/wiringdiagrams.aspx
(I changed my pup switch to the fender 4 by 4, not the factory with all in a row, shown)

 

[Artie]

Re: need help!!

I'll take a shot when I get home from work, if you can hold out for 8 hours.

 

[mattk]

Re: need help!!

Thanks Artie. I actually got my pups working , however they all sound very similar to eachother now. I grounded the 59n braid to the volume pot and soldered it's black wire to the pup switch. Then I grounded the black and soldered the white wires for the VS mid pup. Finally I grounded the green/silver wire, soldered the black and soldered the red n' white together for the SH-5 bridge. Not sure what went wrong?

-Matt

 

[Artie]

Re: need help!!

Here's the Duncan-ized version of the Ibby diagram: