Need power adapter for my Delay pedal

[51501984]

I have a Maxon AD80 Delay pedal that runs off one 9V battery and it really sucks them up. I want to get an adapter for it , do I just need a basic 9V adapter? The small sticker on the pedal reads: DC IN 9V/10V

Thanks!

 

[STRATDELUXER97]

Re: Need power adapter for my Delay pedal

I have a Maxon AD80 Delay pedal that runs off one 9V battery and it really sucks them up. I want to get an adapter for it , do I just need a basic 9V adapter? The small sticker on the pedal reads: DC IN 9V/10V

Thanks!

Invest in a good quality "buffered" power supply...The ones I use are the Boss PSA 120,The DanElectro 9Volt adapter and the Ibanez adapters...You can use Radio Shack's white adapters but make sure the rating of the milliamps on your adapter is at least the same or exceeding your pedal's miliamp requirements to power up and work correctly...What you don't want is any hum and cheap adapters almost always cause hum..If your pedal states a 400 milliamps draw,then get at least a 400 ma or higher adapter to use with your pedal..

John