New Basslines blackouts with 2 band eq wiring and soldering problems

[Karim Abusada Lues]

hi there guys, i need a bit of help to wire and solder my new blackouts with 2 band eq, i have 4 holes on my bass and i don´t know how wiring the 2 band eq with the 2 blackouts (basslines) can i wire them with 2 volumes (for each pickup without a master tone or master volume) and 2 tones from the 2 band eq (treble/bass not concentric)with a total of 2 volumes and 2 tones and how it be the diagram for that? thanks guys

Regards.

Karim

 

[Funkfingers]

Re: New Basslines blackouts with 2 band eq wiring and soldering problems

Your circuit diagram will be a hybrid. The 25kOhm N Vol., B Vol. of an active Jazz Bass, Their combined output connect to the input of STC-BO-2S. The interconnection between the Treble and Bass controls is made via the EQ PCB itself. The PCB Output wire runs to the Tip contact of the TRS jack socket.


EDIT - There may be an error in the official SD wiring instructions. Some older versions of these show an unnecessary second output connection.