T tcarnes68 New member Jan 12, 2019 #1 Can I pull the nickel plate off of my pearly gates and solder it onto my JB that did not have one on it originally?
Can I pull the nickel plate off of my pearly gates and solder it onto my JB that did not have one on it originally?
idsnowdog Imperator of Indignation Jan 12, 2019 #2 Re: Nickel cover plate Yes as long as the poles have the same spacing. You may want to place a small strip of cardboard over the slugs so the cover doesn't rattle and create feedback. If it does you can just repott the pickup which is easy.
Re: Nickel cover plate Yes as long as the poles have the same spacing. You may want to place a small strip of cardboard over the slugs so the cover doesn't rattle and create feedback. If it does you can just repott the pickup which is easy.
A AlexR New member Jan 13, 2019 #3 Re: Nickel cover plate Usually some form of masking tape is enough
