NPD EHX Dual EXP pedal

[Securb]

I got a dual expression pedal to control the H9 and H90. When I plugged it in, I noticed the H90 supports two EXP pedals. Now I have to decide if I will use it just for the H90 and keep two EXP pedals on my board or have it control both the H9 and H90. I do have more real estate on the board since getting the H90. I have removed my Carbon Copy, Ibanez CS9, and BOSS BF2 in the past few weeks.

My biggest concern has been put to rest, the action and range of the pedal is very comfortable. The range is also adjustable on each side independent of each other.

 

[Mincer]

I use something similar. Mine is a Mission Engineering pedal, and it has a wah switch under the toe. Press it once, and it controls device 1, press it again, and it is controlling device 2.

 

[Securb]

That sounds cool. I want to be able to control two parameters at the same time. i.e. shifting the parametric EQ with the wah so the highs do not get too harsh or adding some reverb/echo to the highs on the wah to keep the highs from getting too thin. I am also going to add a little modulation with my tape delay setting, I can increase the tape warble as the delay time is sped up. There are also a bunch of ambient, spacy things I would like to do.

 

[Mincer]

So the H90 doesn't allow more than one parameter per program?

 

[Securb]

So the H90 doesn't allow more than one parameter per program?

I didn't think so but now that I see two EXP inputs, it must. I am going to pull up the control software this weekend and play around.

 

[Mincer]

I didn't think so but now that I see two EXP inputs, it must. I am going to pull up the control software this weekend and play around.

A lot of gear will allow multiple parameters to be assigned to just 1 pedal my old DL4 does this. Set the controls one way, that's your toe down. Put heel down, set the controls a different way (any and all parameters, if you want), and the pedal morphs between the 2 settings.