out of phase question?

A

Alonso Ortega

New member
I added two mini switches in my HH guitar for series/split/parallel on each, separately they work perfect but in middle position with both of them on I get out of phase sounds. Which cables I have to switch to get in-phase sound?
 
Re: out of phase question?

Were these out of phase before??

Its likely one of the switches you've wired the output leads wrong.....so the 2 wires on 1 of the switches has to be reversed
 
Re: out of phase question?

wiring diagram.jpg

This is the way I wired it, sorry about the crappy image, just did in in paint.

Notice that the Neck PU is intended to be series/north coil/parallel while the Bridge PU is intended to be series/south coil/parallel
 
Re: out of phase question?

Thats why they're out of phase then. You've wired them that way.

This setup does not work unless you flip a magnet.....but in saying that this might only solve the oop for portions of the switching options
 
Last edited:
Re: out of phase question?

Yes, I know i wired them that way, that's the reason I submited this post. Anyway, I figured out how to get it right this time so don't worry.
 
You must log in or register to reply here.
Back
Top