Out Of Phase with Burstbucker Pro's (2 Conductor Wiring)

[Dukedy]

Hi need serious help and wondering how to wire 2 Burstbucker pro's using a dpdt push pull to get an out of phase effect. The BB's are 2 conductor wiring and i can't find a diagram of how to do it anywhere. Not very adept at wiring but if im given understandable instructions i can do it. Any help would be appreciated. Converting to 4 conductor wiring isnt an option.
Cheers,
Dylan.

 

[Dukedy]

Re: Out Of Phase with Burstbucker Pro's (2 Conductor Wiring)

Oh an i want to use a the push pull knob and dont want to turn the pickup around.

 

[Funkfingers]

Re: Out Of Phase with Burstbucker Pro's (2 Conductor Wiring)

Try this schematic. http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_2v_2t_3w_phase

Obviously, the Gibson equivalent of the SD red/white series link happens inside each humbucker. Ignore that.

The braid goes to ground.

In the interests of future compatibility, I would use the Gibson white conductor as hot and black as ground.