Semi-hollowbody
New member
Does anyone have any information on the output and tonal characteristics of the Duncan Designed HB 102 humbuckers?
I would appreciate any feed back.
Thanks.
I would appreciate any feed back.
Thanks.
Output on HB 102's
- Thread starter Semi-hollowbody
- Start date
yegbert
New member
Re: Output on HB 102's
The info SD publishes on them is here.
I recently measured the pickups in three new Squiers: an Esprit, a Thinline Tele and a Cmambered Tele. They all measured about the same, something under 8k neck and over 16k bridge. I picked up a pickup used that is clearly marked HB102N and it measured under 8k. Those numbers are close to the specs of the Duncan USA-made SH-4 JB™ bridge and SH-2n Jazz neck the HB102 set was modeled after, so I figure those guitars must have the HB102s.
It should be relatively easy to find one of those guitars in a decent guitar store, so maybe you find one and play it to experience first hand what their character is like.
The info SD publishes on them is here.
I recently measured the pickups in three new Squiers: an Esprit, a Thinline Tele and a Cmambered Tele. They all measured about the same, something under 8k neck and over 16k bridge. I picked up a pickup used that is clearly marked HB102N and it measured under 8k. Those numbers are close to the specs of the Duncan USA-made SH-4 JB™ bridge and SH-2n Jazz neck the HB102 set was modeled after, so I figure those guitars must have the HB102s.
It should be relatively easy to find one of those guitars in a decent guitar store, so maybe you find one and play it to experience first hand what their character is like.
Similar threads
