P - J Bass Blend pot problem.

RGZ184

New member
I'm wondering if I got a bad pot on this. I wired up my P-J bass with a Master Volume, Blend Pot, and a Master Tone, on 1 end of the blend pot I have the precision pickup on full, but when I turn all the other way to the jazz pickup, it fades out. In the middle you still get the blend of the 2 pickups. Should I consider getting another blend pot if that's the cause? Any tips are great.
 
Re: P - J Bass Blend pot problem.

Hmm, if you can post some pics of your wiring, we might be able to figure out what is going on. I wouldn't rule out a bad pot, though.
 
Re: P - J Bass Blend pot problem.

Sounds like the blend pot is wired up wrong.

Certain blend pots are not reversible. Especially the M/N taper pots like a Bournes.

Also keep in mind the P will always overpower the J. So the center position won’t be a 50/50 blend.


Sent from my iPhone using Tapatalk
 
Re: P - J Bass Blend pot problem.

Also keep in mind the P will always overpower the J. So the center position won’t be a 50/50 blend.


Sent from my iPhone using Tapatalk

This has always been an issue. Also, the J will hum, and the P will be quiet. This is why many people search for a more powereful, hum-cancelling J pickup in P-J basses.
 
Re: P - J Bass Blend pot problem.

This has always been an issue. Also, the J will hum, and the P will be quiet. This is why many people search for a more powereful, hum-cancelling J pickup in P-J basses.

Back in the late 70s I had a ‘76 P bass with two P pickups.

That works great and to me sounds much better.

Same idea here.

6b411c7905d1c35fac9b564c032e489c.jpg



Sent from my iPhone using Tapatalk
 
Re: P - J Bass Blend pot problem.

BC Rich was doing 2 P-Bass pickups in the 70s, too.

To me, the P-J thing only kinda works. It isn't 'the best of both worlds', and doesn't make a P sound like a J. I think the idea is nice, but I've never heard it executed perfectly.
 
Back
Top