Hey folks, I'm hoping I can get some wiring help. I've had the P-Rails in my '93 Les Paul studio for a couple years, standard two push/pull knob setup. Series/P90/rail/parallel.
I've liked this setup but never really loved it. My Les Paul is my #1 rock guitar and I've come to the realization that it just needs to rock, so I scored a set of chrome DiMarzio Super Distortions for it.
I recently jumped on a $100 Epiphone Dot Studio. Two humbuckers, two knobs, 3 way switch.
I'd like to swap the P-Rails from the Lester into the Dot. I'll use the two push/pull knobs with it. Here's the twist, I want to wire both knobs up as volume knobs, no tone controls. Can anyone help me out with a wiring diagram that will make this happen?
TL;DR:
Need a P-Rails diagram for two volume push/pull controls and 3 way switch. No tone controls. Series/P90/rail/parallel.
Thanks in advance.
I've liked this setup but never really loved it. My Les Paul is my #1 rock guitar and I've come to the realization that it just needs to rock, so I scored a set of chrome DiMarzio Super Distortions for it.
I recently jumped on a $100 Epiphone Dot Studio. Two humbuckers, two knobs, 3 way switch.
I'd like to swap the P-Rails from the Lester into the Dot. I'll use the two push/pull knobs with it. Here's the twist, I want to wire both knobs up as volume knobs, no tone controls. Can anyone help me out with a wiring diagram that will make this happen?
TL;DR:
Need a P-Rails diagram for two volume push/pull controls and 3 way switch. No tone controls. Series/P90/rail/parallel.
Thanks in advance.
Last edited:
