I'm hoping to pop my new P Rails into my SG and to access all of the available sound combinations with 4 push pull pots and the 3-way switch (rather than with triple shots). Is there anywhere I can get a wiring diagram for this setup. Or if anybody has any related guidance, I'd be happy to hear it. Thanks!
P Rails with 4 push pull pots
- Thread starter lambgreg
- Start date
You can adapt this to use 4 p/p pots to dial in each pup separately.
https://www.seymourduncan.com/resources/pickup/wiring-diagrams
Why do you want p/p pots instead of Triple Shots? P/P are WAY more bother, confusing, and time consuming to use than TS.
https://www.seymourduncan.com/resources/pickup/wiring-diagrams
Why do you want p/p pots instead of Triple Shots? P/P are WAY more bother, confusing, and time consuming to use than TS.
ThreeChordWonder
New member
I tried P-Rails in my 2015 SG and didn't like them. YMMV of course.
There's a schematic on the SD website for using just two push-pulls to access the rails, P90s, series and parallel, on the SD website.
https://www.seymourduncan.com/images/wiring-diagrams/2PRail_3G_2V_2TppSPL.jpg
There's a schematic on the SD website for using just two push-pulls to access the rails, P90s, series and parallel, on the SD website.
https://www.seymourduncan.com/images/wiring-diagrams/2PRail_3G_2V_2TppSPL.jpg
