So I have finally decided to make a run at wiring a neck pickup in my SG parallel with a push pull volume pot. Currently the guitar is wired normal, with the bridge mag flipped to get out of phase in the middle. I have been able to find some crazy diagrams out there for all kinds of split/ parallel options, but I could use some advice on a simple parallel wiring for just the neck pickup.
I assume that it's done the same way as speakers, in that the two start wires are soldered together to the lug, and the two end wires are soldered to ground? My pickup is 2 wire, so I have already run 2 additional wires up to the coils.
My biggest issue is with the push pull pots. I am not sure how these work. They look like a regular pot with 6 extra lugs. What's the deal with these?
I assume that it's done the same way as speakers, in that the two start wires are soldered together to the lug, and the two end wires are soldered to ground? My pickup is 2 wire, so I have already run 2 additional wires up to the coils.
My biggest issue is with the push pull pots. I am not sure how these work. They look like a regular pot with 6 extra lugs. What's the deal with these?