Parts - Gibson and Fender hardware, knobs, plastic parts, etc.

ItsaBass

New member
Add shipping to all prices, unless stated otherwise.

Tailpieces:

#1: gold, from 2001 LP Studio Plus, posts, but no inserts/anchors, plating on posts and edges of bridge is worn off, plus general surface wear (mild) - $13
8330508075_acdf1a511a_k.jpg


Bridges:

#1: Nashville, nickel, pictured on Explorer above, with adjustment posts and bushings, in good shape, but has a few small bumps, and some tarnish in the adjustment slots - $20

#2: Gibson Nashville TOM bushings and adjustment posts, chrome - $8
8650197129_363dc9dd35.jpg


#3: Fender MIM complete synchronized vibrato. Arm, bridge, block, springs, claw, screws. Minor rust on low E saddle, some cat chew marks on plastic tip, arm straightened a bit - $30
8651300392_226844ec08_c.jpg

8651299112_fe294a21de_c.jpg

8650199579_cfc67c9e24_c.jpg

8651297354_a44cdc678f_c.jpg


Tuners:


#1: Mini Grover, 6 in line, with screws, pictured on Explorer above. In good condition, but some bumps on finish. One tuner has a brief "jump" in its rotation, but works just fine - $25

#2: Mini Grover, 3X3, with screws, from Gibson Jr., in good condition, but do show about 12 years of mild use - $25
8651313190_6fc2cce771_c.jpg

8650212937_50b8abbaab_c.jpg

8651309986_21f08feea1_c.jpg

8650210143_809d832c1f_c.jpg

8650208859_06038bc36b_c.jpg


#3: Fender MIM Strat tuners, chrome. Nicks and scrapes, but cosmetic only. Two nubs on back of each tuner - $25
8650204493_07214a4beb_c.jpg

8650203613_78b74340a1_c.jpg

8650202403_b216de131b_c.jpg


Pickups:


#1: Gibson aftermarket P-90 pair, black dogear. Some pick damage on covers. Pickups were purchased new 10 years ago, and have been in the same guitar since. $94.15

#2: Fender MIM Strat wiring harness, complete and original. Nice, unmolested factory harness. Three original pickups, CTS pots and non-boxed blade switch - $50 (pick guard not included)
8650205709_426eb84fd1_c.jpg

8651305872_53340b3f63_c.jpg


Plastic:

Genuine Fender Strat pickup covers and knobs, from '90's and '00's. Various shades of cream. I used to take out the stock cream plastic and install white plastic first thing when I picked up a Strat, and these are all the stock parts that I removed. The one set that is white on the bottom and yellow on the top has aged naturally; the rest were cream from the start. I'd like $6 for a set of knobs and covers, $4 for a set of knobs, or $4 for a set of covers. FAR RIGHT KNOBS/COVERS HAVE BEEN SOLD.

8339577029_ee399ca848_b.jpg
8340630430_9ccb303f0f_b.jpg


Combos:


#1: All MIM Strat parts (wiring harness, tuners, vibrato) - $100 shipped

#2: All pickup covers and knobs - $15 shipped

#3: Both sets of mini Grovers - $50 shipped
 
Last edited:
Re: Parts - Gibson and Fender hardware, knobs, plastic parts, etc.

#2: Mini Grover, 3X3, with screws, from Gibson Jr., in good condition, but do show about 12 years of mild use - $25

Color? Pics?
 
Re: Parts - Gibson and Fender hardware, knobs, plastic parts, etc.

I am interested in the MIM Fender trem set, if you still have it. PM sent

-dave
 
Re: Parts - Gibson and Fender hardware, knobs, plastic parts, etc.

Paypal'ing you for the Nickel Tailpiece now. - nick

Thanks, Nick.

I'll paste this here until you okay the tailpiece:

#1: nickel, from 2000 SG Jr., no posts or inserts/anchors, in good shape - $8
8650215009_3342152a82_c.jpg
 
Re: Parts - Gibson and Fender hardware, knobs, plastic parts, etc.

Is the fender trem still available? I am interested if it is.

Thanks, dave
 
Back
Top