Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
- Thread starter Flores_68
- Start date
beaubrummels
Well-known member
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
Would work fine, but depends on the music you are playing and the amp you are using.
Other alternates I've tried:
PGB, JazzN
Seth set
PGB, Seth neck
PG set
Jazz set
Jazz bridge, Seth neck
59N in the bridge, JazzN
Whole Lotta Humbucker set
Brobucker bridge, 59/A4 neck
Slash bridge, 59/A4 neck
A2P set
Custom Custom, A2P neck
...for a start
Would work fine, but depends on the music you are playing and the amp you are using.
Other alternates I've tried:
PGB, JazzN
Seth set
PGB, Seth neck
PG set
Jazz set
Jazz bridge, Seth neck
59N in the bridge, JazzN
Whole Lotta Humbucker set
Brobucker bridge, 59/A4 neck
Slash bridge, 59/A4 neck
A2P set
Custom Custom, A2P neck
...for a start
beaubrummels
Well-known member
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
Other people complain the 59 is scooped. I must think of scooped as somewhat normal. For me, a 59 sounds thick enough in the middle but lacks the extreme highs and lows that some other pickups have. Pearly, to me in my LP, sounds like it has more high treble (think like Fender bright, not quite twang but bright) and a bit more chunk on the lows than my 59s do (muted chords with my 59s sound a little weak, whereas with a Pearly muted chords sound 'right'). But that is my LP Studio (chambered) through my Orange AD50, RambleFX MarvelDrive, Tech21 SansAmp and any other MIAB I have.
Other people complain the 59 is scooped. I must think of scooped as somewhat normal. For me, a 59 sounds thick enough in the middle but lacks the extreme highs and lows that some other pickups have. Pearly, to me in my LP, sounds like it has more high treble (think like Fender bright, not quite twang but bright) and a bit more chunk on the lows than my 59s do (muted chords with my 59s sound a little weak, whereas with a Pearly muted chords sound 'right'). But that is my LP Studio (chambered) through my Orange AD50, RambleFX MarvelDrive, Tech21 SansAmp and any other MIAB I have.
ItsaBass
New member
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
I prefer the opposite, myself. PG neck is a tad too bright for the neck position, and Seth bridge lacks sufficient treble for the bridge position, for my taste.
My favorite combination of PG and Seth is a Seth neck in the neck position, and a PG neck in the bridge position.
When I use Seths in both positions, I use two neck models, with the highest measured DCR of the two placed in the bridge position. The little bit of extra output can help balance the volumes, and the difference in winds is usually minor enough that it doesn’t make the bridge pickup sound overwound (a sound I don’t like).
I prefer the opposite, myself. PG neck is a tad too bright for the neck position, and Seth bridge lacks sufficient treble for the bridge position, for my taste.
My favorite combination of PG and Seth is a Seth neck in the neck position, and a PG neck in the bridge position.
When I use Seths in both positions, I use two neck models, with the highest measured DCR of the two placed in the bridge position. The little bit of extra output can help balance the volumes, and the difference in winds is usually minor enough that it doesn’t make the bridge pickup sound overwound (a sound I don’t like).
Last edited:
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
The PG is brighter than the Seth. The Seth is also unpotted. It really depends on the EQ you need/want, and the level of dynamics that is important to you. If you use maybe Plexi Marshall levels of gain at the most, and a lot of clean, you would dig the Seths. If you play heavier stuff, with a more preamp gain, and you need help cutting through, the PG is great.
The PG is brighter than the Seth. The Seth is also unpotted. It really depends on the EQ you need/want, and the level of dynamics that is important to you. If you use maybe Plexi Marshall levels of gain at the most, and a lot of clean, you would dig the Seths. If you play heavier stuff, with a more preamp gain, and you need help cutting through, the PG is great.
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
If you use maybe Plexi Marshall levels of gain at the most, and a lot of clean, you would dig the Seths. [/QUOTE]
I went for the Seths: they're awesome! The most overdrive I'll go for is a Tumnus at 12 o'clock and the Seths chime... Just made me wonder, why does Gibson deliver a Les Paul that doesn't sound like a Les Paul? Like the old Huey Lewis song "sometimes bad is bad"
If you use maybe Plexi Marshall levels of gain at the most, and a lot of clean, you would dig the Seths. [/QUOTE]
I went for the Seths: they're awesome! The most overdrive I'll go for is a Tumnus at 12 o'clock and the Seths chime... Just made me wonder, why does Gibson deliver a Les Paul that doesn't sound like a Les Paul? Like the old Huey Lewis song "sometimes bad is bad"
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
I went for the Seths: they're awesome! The most overdrive I'll go for is a Tumnus at 12 o'clock and the Seths chime... Just made me wonder, why does Gibson deliver a Les Paul that doesn't sound like a Les Paul? Like the old Huey Lewis song "sometimes bad is bad"[/QUOTE]
The Seths are indeed awesome in every guitar I've tried them in.
I went for the Seths: they're awesome! The most overdrive I'll go for is a Tumnus at 12 o'clock and the Seths chime... Just made me wonder, why does Gibson deliver a Les Paul that doesn't sound like a Les Paul? Like the old Huey Lewis song "sometimes bad is bad"[/QUOTE]
The Seths are indeed awesome in every guitar I've tried them in.
beaubrummels
Well-known member
Re: Pearly Gates neck and Seth Bridge on a Gibson Les Paul Standard
There are a significant number of Seymour Duncan pickup sets that I've always thought would make better stock pickup sets than anything Gibson has. Each touches a different era of Gibons or artist sound, but many SD sets would be better factory options than anything Gibson has stock currently.
There are a significant number of Seymour Duncan pickup sets that I've always thought would make better stock pickup sets than anything Gibson has. Each touches a different era of Gibons or artist sound, but many SD sets would be better factory options than anything Gibson has stock currently.
