Pedal Power Supply with 18v and 1,300ma?

Vincent Vespa

Vincent Vespa

New member
Hey-lo everyone.

I'm just curious if anyone here knows of a pedal board power supply that can supply juice to my board. I only have one outlet left in my jam room, so I've kind of run out of options to use all of my pedals at once.

I have a Dunlop DC Brick, but it won't power my Digitech Harmony Man! :(

My pedals are as follows:
Ibanez TS9
TC Electronic Polytune
Ibanez Weeping Demon (WD7)
Digitech Harmony Man
MXR 10-Band EQ
MXR Carbon Copy
ISP Noise Decimator G-String

I wandered around the internets for about 20 minutes but didn't turn up with anything of particular interest. It seems I can find something with either 18v outputs or enough juice for the Harmony Man, but not both.

Any info, guys? If there isn't one on the market, would anyone know how I would go about building one myself?
 
Re: Pedal Power Supply with 18v and 1,300ma?

18 volts??

You need a 9 volt AC adapter thats rated at 1300mA.

The DC Brick (and almost ALL other power supplies) are DC power supplies.

The Voodoo Lab AC Pedal Power is an AC power supply that might do the Harmony Man but I'm not sure.
 
Re: Pedal Power Supply with 18v and 1,300ma?

I need the 18v plug for the 10 band EQ.

You're right about the AC, though. Please excuse me. I is tired. :-\
 
Re: Pedal Power Supply with 18v and 1,300ma?

Ok, so you need to power the following pedal correct?

Ibanez TS9
TC Electronic Polytune
Ibanez Weeping Demon (WD7)
Digitech Harmony Man
MXR 10-Band EQ
MXR Carbon Copy
ISP Noise Decimator G-String

Here is what I'd do if I were you...

Voodoo Lab Pedal Power II+

The TS-9, Polytune, Wah, Carbon Copy and G-String are all 9 volt pedals that's 5 of the 8 ports on a PPII+ then using the 18 volt cable from Voodoo Lab power the 10 band EQ using 2 more ports and using the outlet in the back of the PPII+ power the Harmony Man.

Nice clean power, easy to get and all things considered at $180 a great deal plus it'll still leave you one 9 volt port for another pedal if you ever need or want it.
 
Re: Pedal Power Supply with 18v and 1,300ma?

Makes sense to me. I didn't even realize it had an outlet on the back.

D'oi!

Thanks for the input. Clearly wasn't thinking well enough to put two and two together on that one.
 
Re: Pedal Power Supply with 18v and 1,300ma?

The ModTone Power Plant has an AC outlet and also an AC out jack designed for the Whammy which might work.
 
Re: Pedal Power Supply with 18v and 1,300ma?

+1 for the Voodoo Lab Pedal Power II+

I just got one a couple days ago and it is great! I think it would work just fine for everything you need...
 
You must log in or register to reply here.
Back
Top