TwilightOdyssey
Darkness on the edge of Tone
Having an out-of-town guest is great, but by Day Three I was itching to get back to work and pick up the prize that I knew awaited me there – the latest addition to my growing HBE collection, the Compressor Retro, or CPR. (I already own a Big D overdrive and Dos Mos dual buffer/boost)
The first thing that greeted me when I opened up the box was the familiar hefty weight common to HBE pedals, and the knowledge that the weight is caused not just by a fancy metal cover, but by the quality of the components within. I could see the colour of the pedal peeking out through the internal bubble wrap.
(Side note: The CPR I have is in a custom black/blue checkerboard pattern. The paint job is amazing!! It’s very Cheap Trick!!)
THE OUTSIDE
The external dimensions of the CPR are the same as the Big D and Dos Mos -- approx. 4.5” wide, 3.5” deep and 2” high. The right side of the pedal contains the input jack as well as the jack for the power supply, and the left side has the output jack. The top of the unit has only 3 controls on it: an ON/OFF switch (with the brightest LED I’ve ever seen!!), and two vintage chicken foot style knobs, labeled Sustain and Level. The paint job on my unit completely wraps around all 6 sides of the pedal. The bottom has the serial number sicker and 4 low-profile rubber feet.
The first thing that greeted me when I opened up the box was the familiar hefty weight common to HBE pedals, and the knowledge that the weight is caused not just by a fancy metal cover, but by the quality of the components within. I could see the colour of the pedal peeking out through the internal bubble wrap.
(Side note: The CPR I have is in a custom black/blue checkerboard pattern. The paint job is amazing!! It’s very Cheap Trick!!)
THE OUTSIDE
The external dimensions of the CPR are the same as the Big D and Dos Mos -- approx. 4.5” wide, 3.5” deep and 2” high. The right side of the pedal contains the input jack as well as the jack for the power supply, and the left side has the output jack. The top of the unit has only 3 controls on it: an ON/OFF switch (with the brightest LED I’ve ever seen!!), and two vintage chicken foot style knobs, labeled Sustain and Level. The paint job on my unit completely wraps around all 6 sides of the pedal. The bottom has the serial number sicker and 4 low-profile rubber feet.