Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Angry_machine

Angry_machine

New member
Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Please let me know your thoughts on these amps with stomps for heavy metal.I...Please be noted that we do not have much more options and variations to where I live.

And I have read and watched Mixed opinions about the VK112, So does for The marshall mg50 solidstate,and in my country we are flooded with Amp simulations and Solidstate,Having the situation in hand,Give me your best opinions.ill be getting one of them within a few hours.Also I will be using the distortion and all fx from my Pedalboard attached below.

my pedalboard:

IMG_20120629_233333.jpg
 
Last edited:
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Metal Muff into the Peavey ValveKing will get you more metal than the MG50.

without hesitation... choose the ValveKing.
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

crguti said:
Metal Muff into the Peavey ValveKing will get you more metal than the MG50.

without hesitation... choose the ValveKing.
Click to expand...

Agreed. The VK could definitely do metal with a boost. ****, you could probably pull it off without the boost but, it would be a bit "flabby" sounding. I personally wouldn't use the Metal Muff, though. That SD-1 will do ya just fine.
BTW, what kind of wah is that?
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

There's a clip on my youtube (can't post it from here) of me hacking my way through an abridged version of Highway Star on my old VK112 and Washy Dime with a DD (IIRC...). Camera mic notwithstanding, it's PLENTY metal and I didn't even run a boost.
 
Last edited:
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

+1 for Valveking.
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Guys,Luck is bad for me, the only last piece of 112 had been sold, There is this only other tube options, That is Marshall MA50c, gimme a fast reply for it im going to the store now!
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

If it don't got tubes, don't buy it.


(and I mean ALL tube, not just a s/s amp with a tube in there somewhere).
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Ma5o surely has tubes lol
 
Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

Re: Pedalboard infront Peavey ValveKing® 112 or Marhsall MG50?

GUYS THANKS FOR YOUR instant opinions. I finally got the MA50c,it sounds real good so far with my stomps on the clean channel!

Ill be around!

THANKSSSSSSS
 
You must log in or register to reply here.
Back
Top