Phase Switch Diagram Clarification

[korovamilkdud]

Take a look at the diagram in question...

http://www.seymourduncan.com/website/support/schematics/phase_switch_humbuckers.html

Now, what is up with that grey wire? Is that a different wire from the hot output, or is it the hot with insulation cut away? I understand the green and black, no big deal there. And the other black...is that one wire that is cut open and wired to ground? Can you ground it to the side of the switch, mine has a couple of tin sides on it...

Sorry if these seem like dumb questions, but I want to make sure I get this right.

 

[Artie]

Re: Phase Switch Diagram Clarification

Grey in that diagram is "white". Since they draw it on a white background, a white wire wouldn't show up.

 

[korovamilkdud]

Re: Phase Switch Diagram Clarification

Grey in that diagram is "white". Since they draw it on a white background, a white wire wouldn't show up.

I'm for drawing two skinny black lines to represent the edges of a white wire. :13:

And the black? Is that one wire with the insulation peeled away, or 2 separate wires, one soldered to the lug and the other to ground?