Pickup install HSS Jackson Dinky

[Danderson]

Hi, I've got a 30 yr old Jackson Dinky model with a HSS configuration. All the pickups/electronics are stock and have not been changed since I've owned it. The pickup selector broke and I decided it would be a good time to upgrade everything. I bought a Hot Rails neck pickup, Vintage Rails for the middle and the Invader for the bridge. Also the 5 way switch I am replacing the old one with is the fender type. Is there a specific way I need to wire everything since i'd be going from single coils to humbucker or any wiring diagrams? All I can find are diagrams for strats. Also this is my 1st time doing stuff like this, so any advice/tips?

Thanks

 

[dmun1]

Re: Pickup install HSS Jackson Dinky

Below is the SD page for wiring a Strat type guitar:

http://www.seymourduncan.com/wiring...middle-s,bridge-h,1-volume,1-tone,5-way-blade

I'm not certain exactly which controls you have on that Jackson, but just select the options on the left if you need to change anything. Pay attention to the details of the of the humbucker wires that get connected together, and the wires that connect to the switch. It basically then becomes exactly like wiring a single coil.