Pickup wiring schematic for my new guitar?

J

Jiet

New member
Hello! I started a guitar project and just finished putting all the parts together. All that's left to do is wiring the guitar, but I don't have very much knowledge on wiring. I can solder pretty good, and if I had a diagram, I could do it easily. However, as much as I've looked on the internet, I can't seem to find a schematic that's close to what I have setup. Can somebody make me a schematic for my setup? My setup is:

5 way switch: image of a similar type of switch to mine: http://www.soundchamberrepairs.com/pictures O-Z/SwitchStratImport.jpg
2 humbuckers, 1 neck (DiMarzio) and 1 bridge (Seymour Duncan)
1 tone knob, push/pull
1 volume knob

I'm looking for a setup that can provide a good variety of tone options, like parallel, series, out of phase, and coil cut. Thanks in advance :)
 
Re: Pickup wiring schematic for my new guitar?

Thanks. I have already looked at those schematics and the closest thing to what I'm looking for is http://www.seymourduncan.com/support/schematics/2h_1v_1t_3w_1pp.html
but the push/pull is on the tone, not the volume, and my switch is a 5-way. Another good one that is really similar is http://www.seymourduncan.com/support/schematics/2hum_vol_tone_5way-w-split.html but mine has a push/pull, and I want to be able to make use of the push/pull. Thanks :)
 
Re: Pickup wiring schematic for my new guitar?

Welcome to the forum. There's a few wiring schematic genius's around here. They'll be by to help you out within the next day or so.
 
Re: Pickup wiring schematic for my new guitar?

JOLLY said:
Welcome to the forum. There's a few wiring schematic genius's around here. They'll be by to help you out within the next day or so.
Click to expand...

If none of them show up, I'll see what I can do. :D
 
Re: Pickup wiring schematic for my new guitar?

Great! I can't wait! I want to finally hear the kind of tones my guitar can produce :D
 
Re: Pickup wiring schematic for my new guitar?

So anyone going to help me out? I'm really eager to get some sounds out of my guitar >_<
 
Re: Pickup wiring schematic for my new guitar?

Welcome to the forum.

Sorry, I can't help with the wiring, but the least I can do is bump you back up to the top so that your chances of getting this seen should be improved.

I can certainly understand your frustration...you can only play the guitar acoustically and use your imagination for so long.

Good Luck on getting some help.
 
Re: Pickup wiring schematic for my new guitar?

70 plus viewings of this post and nobody has finished helping Jiet.

If ArtieToo is busy, possibly someone could give this a try.

Jiet is really sufferin' man.

Thanks

Dave
 
Re: Pickup wiring schematic for my new guitar?

how many lugs your 5 way switch has ? can u post better viewing of the switch ?

just suggestion, if you like more tone options switching,..you might wanna use 5 way superswitch.
 
Last edited:
Re: Pickup wiring schematic for my new guitar?

Man . . . thats a weird 5-way. :eek13:

If it was me, I'd just get a Fender-style 3-way, like this, (part # 3191), and wire it up as normal. Then use the push-pull to split both buckers.

Look at this thread. I'd use the third drawing - "Split to neck-side coils. (humbucking)"

I can do you a diagram, but I've got a couple in front of you, and I just don't have quite the free time that I used to. I'm movin' slow. :)

Artie
 
Re: Pickup wiring schematic for my new guitar?

Benye said:
how many lugs your 5 way switch has ? can u post better viewing of the switch ?

just suggestion, if you like more tone options switching,..you might wanna use 5 way superswitch.
Click to expand...

The image in my original post is my switch and if a lug is the places you solder, it has 7, all on one side. It might be weird, but my old guitar has the same switch as this one.

ArtieToo said:
If it was me, I'd just get a Fender-style 3-way, like this, (part # 3191), and wire it up as normal. Then use the push-pull to split both buckers.

Look at this thread. I'd use the third drawing - "Split to neck-side coils. (humbucking)"
Click to expand...

I already have this switch so I don't want to go out and get another one. I didn't quite understand the diagrams in the link you posted. Is that a push/pull that everything is being wired to? How would i wire it with the switch? Sorry for being so noobish :p
 
Re: Pickup wiring schematic for my new guitar?

Jiet said:
I already have this switch so I don't want to go out and get another one.
Click to expand...

I understand, but there's only so many things you can do with two humbuckers. I'll see what I can do.

Jiet said:
I didn't quite understand the diagrams in the link you posted. Is that a push/pull that everything is being wired to? How would i wire it with the switch? Sorry for being so noobish :p
Click to expand...

Yes, thats a push-pull. A DPDT switch would work the same. They both have six terminals. The two dark lines that go to the left are just the two "hot" wires that you wire to a 3-way or 5-way as normal. And don't forget the ground.

If you use the 5-way, however, you may not need the push-pull. Let me see what I can come up with.
 
Re: Pickup wiring schematic for my new guitar?

Jiet said:
The image in my original post is my switch and if a lug is the places you solder, it has 7, all on one side. It might be weird, but my old guitar has the same switch as this one.
Click to expand...

yes a lug is a place you solder into.
then it must be standard strat import switch.


im free. but i wont hijack Artie's call :D
 
Re: Pickup wiring schematic for my new guitar?

Benye said:
im free. but i wont hijack Artie's call :D
Click to expand...

Don't worry about that at all. Its nice to have someone else to handle wiring chores. ;)

I just don't have quite the time that I used to. :yell:
 
Re: Pickup wiring schematic for my new guitar?

Benye said:
yes a lug is a place you solder into.
then it must be standard strat import switch.


im free. but i wont hijack Artie's call :D
Click to expand...

You can make one too! I's nice to have more options ^^

Thanks!
 
You must log in or register to reply here.

Similar threads

newby oldfart
Please help me wire out my tone control
Replies
8
Views
280
newby oldfart
newby oldfart
P
Nazgul Sentient install help - Possible wiring discrepancy from the factory?
Replies
1
Views
180
Mincer
Mincer
C
HSH Wiring question
Replies
6
Views
523
Chris H
C
G
AHB1 wiring for a strat-like guitar
Replies
4
Views
392
idsnowdog
idsnowdog
K
Wiring Diagram request: 1 P-rail, tone, volume, 3-way toggle
Replies
0
Views
38
koen van hees
K
Back
Top