PowerStage 700 Now Shipping!
- Thread starter Mincer
- Start date
Riley
New Products Specialist
Re: PowerStage 700 Now Shipping!
From our engineering department:
PowerStage 700 Audio Specifications
• Speaker Outputs
o THD+N @ 1kHz, full rated power - ≤0.03%
o THD+N @100 Hz, 1 W out – ≤0.005%
o Output referenced idle noise
• A-weighted ≤130µV
• Unweighted ≤160µV
o Dynamic Range, A-weighted @ 700W – 117 dB
o Bandwidth – 10 Hz to 70 kHz ± 3 dB
• XLR Outputs
o THD+N @ 0dBu - <0.02%
o Max. output Voltage before clipping – 8V RMS
o Noise referred to output – 31.6µV
o Noise referred to input – 109dBV
o Dynamic range, referred to max. output – 108dB
• EQ Parameters
o Bass +/- 13 dB @ 87 Hz
o Midrange +/- 13 dB @ 712 Hz
o Treble +/- 13 dB @ 6.61 kHz
From our engineering department:
PowerStage 700 Audio Specifications
• Speaker Outputs
o THD+N @ 1kHz, full rated power - ≤0.03%
o THD+N @100 Hz, 1 W out – ≤0.005%
o Output referenced idle noise
• A-weighted ≤130µV
• Unweighted ≤160µV
o Dynamic Range, A-weighted @ 700W – 117 dB
o Bandwidth – 10 Hz to 70 kHz ± 3 dB
• XLR Outputs
o THD+N @ 0dBu - <0.02%
o Max. output Voltage before clipping – 8V RMS
o Noise referred to output – 31.6µV
o Noise referred to input – 109dBV
o Dynamic range, referred to max. output – 108dB
• EQ Parameters
o Bass +/- 13 dB @ 87 Hz
o Midrange +/- 13 dB @ 712 Hz
o Treble +/- 13 dB @ 6.61 kHz
Hurricane
New member
Re: PowerStage 700 Now Shipping!
I'da responded earlier but nothing came in my email notifications . These are impressive
specs . Thanks -
¿ Could I impose upon you one more favor to find the specs on the smaller amp ?
Happy New Year
HR
I'da responded earlier but nothing came in my email notifications . These are impressive
specs . Thanks -
¿ Could I impose upon you one more favor to find the specs on the smaller amp ?
Happy New Year
HR
Re: PowerStage 700 Now Shipping!
I haven't A/B both amps, but I did have a Matrix for about a month. I work with support to try and get it to sound right with my Fractal AX-FX II XL. Tried all kinds of tweaking and adjustments to presets (which shouldn't be necessary, that was a red flag).
I hated it, it sounded flat and lifeless. I was using a Mesa 2:Ninety, so I did have a good reference. Needless to say, I sent the Matrix back.
I have used many amps since, but currently I have both the PowerStage 170 and 700. They both sound amazing right out of the box, no ****ing around necessary.
Also the PowerStage units seem to have much more headroom, like crazy loud without additional distortion. Even the 170 I've never had to full crank. I think I've had at about 2 o'clock at most.
I haven't A/B both amps, but I did have a Matrix for about a month. I work with support to try and get it to sound right with my Fractal AX-FX II XL. Tried all kinds of tweaking and adjustments to presets (which shouldn't be necessary, that was a red flag).
I hated it, it sounded flat and lifeless. I was using a Mesa 2:Ninety, so I did have a good reference. Needless to say, I sent the Matrix back.
I have used many amps since, but currently I have both the PowerStage 170 and 700. They both sound amazing right out of the box, no ****ing around necessary.
Also the PowerStage units seem to have much more headroom, like crazy loud without additional distortion. Even the 170 I've never had to full crank. I think I've had at about 2 o'clock at most.
