PROBLEM Strat-X Switching System (3 Single Coils, S-1 Switch and 5-Way Super Switch)

[johncaetano]

Hi everybody! This is my first thread!

I want to re wire my strat, with my singlecoils. I bought a S-1 Fender Switch and a 5-Way Super Swtich. Which gives me the possibility to make this wiring mod:
ORIGINAL STRAT-X SWITCHING SYSTEM https://drive.google.com/file/d/0B6DLKUeMy2kFN1NFUnlnVjNGR1E/view?usp=sharing


The follow diagram should work, but I tested it and when S-1 is DOWN, instead NECK & BRIDGE in series, position 3 gives me: NECK in series with (BRIDGE//MIDDLE parallel).

Somebody could succeed with this wiring mod?

I simulated the circuit on PROTEUS. For results, click on this link in PDF: https://drive.google.com/file/d/0B6DLKUeMy2kFNlJscmtKTVVvRjA/view?usp=sharing

The proposition is for the following image: https://drive.google.com/file/d/0B6DLKUeMy2kFN1NFUnlnVjNGR1E/view?usp=sharing


I would not like to miss this position NECK&BRIDGE in series in my mod.


Thanks guys! I Always check this forum, turned to be very helpful for me. But now I couldn't find my answer so I signed in the community.
Cheers

 

[Funkfingers]

Re: PROBLEM Strat-X Switching System (3 Single Coils, S-1 Switch and 5-Way Super Swit

Welcome to the forum.

It is impossible to comment on why your first attempt at the wiring did not operate as expected without having both your schematic diagram and images of your actual soldering work to compare.