Randall RM4 question

[Burkwieser]

I have a Randall RM4 preamp and RT2 stereo amp. I am looking at purchasing another RM4. Would I be able to run both RM4s into the RT2? Say using an A+B connection. Or am I going to have to purchase another amp. Plus could I use the midi RF4 foot control to control all three?

Thanx

 

[Hawkman]

Just run an AB box between the 2 RM4's. You will need another foot controller for the second RM4. Only problem I've experienced with chaining two RM4's together is using the effects loops. But I figured a way to rig it so the effects are present in both RM4's. I just ran a splitter between parallel loops and effects inputs and outputs so I connect to both RM4 loops. Works like a charm! Good luck Burkwieser.

 

[Burkwieser]

Cool!! Thanks Hawkman. The midi foot controller didn't work eh? I was hoping it would change both channels identically the same. Crap!! Oh well. I'll let you know what I come up with. Thanks again.

 

[lastwinj]

you can set it up to change channels however you want. just depends on how you split them. could make it accept channel change info on a different channel than #1.

germ