Really need help with dimebuckers !!!!!!!!

[Jamie]

I have got 2 dime buckers installed . I followed the diagram to a "t" when installing them, heres the link on the seymour site ! http://www.seymourduncan.com/website/support/schematics/2hb_1vol_2tones_3way.html

I got all the correct hardware. 3 500k pots a mono input . Now the volume and the 3 way work fine , but both tone pots seem to do nothing, I am mega stumped and really need some help. Any suggestions on whats wrong. Thanks in advance !!

 

[RACER X]

Re: Really need help with dimebuckers !!!!!!!!

Not sure, Try to PM Robert S., he's the man when it comes to wireing p/u's plus he uses a Dime in his Conklin so he should know, good luck.

 

[Robert S.]

Re: Really need help with dimebuckers !!!!!!!!

The Dimes are no different than any other HB as far as wiring goes. If the tone pots are not working you have a wiring problem common to both. Take a deep breath and take another look around. If you are wired exactly to that schematic the tone pots will funtion. Not to be a smart ass, but you do realize that the caps must be soldered to the tone pot terminal and to the chassis of the pot at the other end, correct? The arrow looking symbol on one end of the caps indicates a connection to ground.