Recognize This Switch

[tpauth]

Anyone recognize this switch, and have some advice on wiring two humbuckers to it? This is in my Godin LGX that i removed my Tetrad pickups from. Original wiring did "coil split" with a push/pull tone pot.

Haven't been able to find an explanation online that explains this switch.

Thanks!

 

[Funkfingers]

Re: Recognize This Switch

No but, if it were known what each position on the selector switch was supposed to do, it should be possible to deduce from the PCB tracks which wires connect where.

 

[Will S-T]

Re: Recognize This Switch

Looks like an early Schaller E Superswitch.

Wiring diagrams readily available at Stewmac

 

[Mincer]

Re: Recognize This Switch

That is a Schaller MegaSwitch, but there are a few different variations (M, E, E+, P, S, etc) You might check out the Schaller site and compare it to the switching that your Godin had. It might also say which one on the Godin site. I use an older one like this on my Brian Moore, a model E with 2 humbuckers.