Snoogles
Cranky-dologist
Rio Grande CUSTOM HYBRID Tall-Breed Single Coil HB (with triple-shot) / SD SH-4 "JB"
First up is a custom order i placed with Rio Grande for a project i never got around to.
One coil is a Tallboy, the other coil is a Halfbreed. I don't remember which is which
There's one little glitch. I cut the leads to solder to the triple shot. So if you dont want to splice in a longer length of 4-conductor lead, then it needs the Triple-Shot to go with it. The TS has all of the original length of 4-conductor cable.
I went and soldered the Rio Grande to the Triple-Shot
Series = 15.83k
1 coil = 7.63
2 coil = 8.2
parallel - 3.95
F-SPACING
Obviously i would like to recoup as much of the original cost as possible. But, this thing is just collecting dust in a parts drawer. So I'm asking $135 for the package. If memory serves, the pickup alone was $160.
Since this pickup is a bit of an unknown quantity, i will pay for return shipping, as long as its in original condition *** DO NOT CUT DOWN HOOKUP LEAD ***
The JB is up on the slease-bay
First up is a custom order i placed with Rio Grande for a project i never got around to.
One coil is a Tallboy, the other coil is a Halfbreed. I don't remember which is which
There's one little glitch. I cut the leads to solder to the triple shot. So if you dont want to splice in a longer length of 4-conductor lead, then it needs the Triple-Shot to go with it. The TS has all of the original length of 4-conductor cable.
I went and soldered the Rio Grande to the Triple-Shot
Series = 15.83k
1 coil = 7.63
2 coil = 8.2
parallel - 3.95
F-SPACING
Obviously i would like to recoup as much of the original cost as possible. But, this thing is just collecting dust in a parts drawer. So I'm asking $135 for the package. If memory serves, the pickup alone was $160.
Since this pickup is a bit of an unknown quantity, i will pay for return shipping, as long as its in original condition *** DO NOT CUT DOWN HOOKUP LEAD ***
The JB is up on the slease-bay
Attachments
Last edited:
