SAG mods
- Thread starter walters
- Start date
Sludgenutz
New member
Re: SAG mods
I'm outta here!
I'm outta here!
sosomething
Seymour Duncan Customer Support
Re: SAG mods
All sag mods should be welded (yes welded - not soldered) into the aeon flux capacitance ingratiation circuit, right before the embryonic dorsal inverter.
All sag mods should be welded (yes welded - not soldered) into the aeon flux capacitance ingratiation circuit, right before the embryonic dorsal inverter.
YJM_Rocks
New member
sosomething
Seymour Duncan Customer Support
Re: SAG mods
Also make sure to mount your drillbit backwards in the chuck so that it goes in the proper direction for this mod.
Don't want to be drilling into the ceiling!!
This mod is in fact a reverse mod so no, don't drill the backplate. Drill the frontplate.
Also make sure to mount your drillbit backwards in the chuck so that it goes in the proper direction for this mod.
Don't want to be drilling into the ceiling!!
GoldenVulture
Braindeadologist
Re: SAG mods
Well for "True SAG" you've got to "AC bias" the output valves on the grid.It needs fairly high voltage so the best way is to wire the AC power from the power switch to the grid pins on each output valves. This keeps the valves energized so when peak signals draw , the AC bias feeds as much power as is needed.
........A couple of 1 ohm wire wound resistors from the grid to the plate , help max load by supplying more power to the outputs. This will give "true SAG" and you'll never have to replace your knobs or any chassis screws at all;ever again!
Disclaimer:The "true SAG" mod should only be performed by completely stupid people;It will not work for people that have half a brain.It is intended only for people who are potentially "Darwin Awards" participants.Any one stupid enough to try this is automatically voiding any claim against the author for "damages" "death" or any other outcome that may result from being a complete half wit!Any pursuant legal action will in itself be met with "evil prosecution" of the greatest order.
Well for "True SAG" you've got to "AC bias" the output valves on the grid.It needs fairly high voltage so the best way is to wire the AC power from the power switch to the grid pins on each output valves. This keeps the valves energized so when peak signals draw , the AC bias feeds as much power as is needed.
........A couple of 1 ohm wire wound resistors from the grid to the plate , help max load by supplying more power to the outputs. This will give "true SAG" and you'll never have to replace your knobs or any chassis screws at all;ever again!
Disclaimer:The "true SAG" mod should only be performed by completely stupid people;It will not work for people that have half a brain.It is intended only for people who are potentially "Darwin Awards" participants.Any one stupid enough to try this is automatically voiding any claim against the author for "damages" "death" or any other outcome that may result from being a complete half wit!Any pursuant legal action will in itself be met with "evil prosecution" of the greatest order.
Last edited:
the guy who invented fire
Fuzzy. Guitars
Re: SAG mods
I like tater tots
I like tater tots
sosomething
Seymour Duncan Customer Support
Re: SAG mods
Ultimate SAG mod - I'm being totally for real.
Step one, loosen belt by a notch or two.
Step two, lower pants so that waistband rests on middle of buttocks or lower.
Step three, make sure you be ho'din' yo piece while you walkin' troo da mall sos you don't drops yo sean-jeans and be flashin' da underoos at da tieet shorties by assidint.
Ultimate SAG mod - I'm being totally for real.
Step one, loosen belt by a notch or two.
Step two, lower pants so that waistband rests on middle of buttocks or lower.
Step three, make sure you be ho'din' yo piece while you walkin' troo da mall sos you don't drops yo sean-jeans and be flashin' da underoos at da tieet shorties by assidint.
Re: SAG mods
really? not my favorite. i love potatos in lots of forms but not the tot
really? not my favorite. i love potatos in lots of forms but not the tot
Fresh_Start
New member
Re: SAG mods
Weedhoppah, you must ask a "real" question first.
Now, go play yer guitar (to paraphrase Zappa).
Weedhoppah, you must ask a "real" question first.
Now, go play yer guitar (to paraphrase Zappa).
ratherdashing
Kablamminator
Re: SAG mods
The Screen Actors Guild does not require modifications at this time.
The Screen Actors Guild does not require modifications at this time.
andrizzle
New member
Re: SAG mods
I'd say you should probably get used to that kind of response.
I smell a:
I'd say you should probably get used to that kind of response.
I smell a:
Gearjoneser
Gear Ho
Re: SAG mods
E
Erlend_G
Guest
Re: SAG mods
To achieve the real "saggy" tone invented by Eric Johnson in the 60's, it is crucial to reduce the filament voltage.
To achieve the real "saggy" tone invented by Eric Johnson in the 60's, it is crucial to reduce the filament voltage.
